2006-08-29 14:36:03 · 12 answers · asked by Lori C 1 in Home & Garden ➔ Cleaning & Laundry
you should try first spreading cat litter on the spot. this will absorb the oil. then, pressure wash the spot with a concrete cleaning solution.
2006-08-29 14:40:17 · answer #1 · answered by jive turkey 2 · 1⤊ 0⤋
cat litter is the right answer my husband has been a mechanic for 25 years and that is all they use. Make sure you scrub with hot water so the cat litter will absorb the grease and dissipate. into the earth and no harmful chemicals cause the cat litter acts as chemical breakdown and washes away. there may be some cat litter left just put into dustpan and trash container that can be rightfully disposed of.
2006-09-01 08:08:00 · answer #2 · answered by babycakes3 2 · 0⤊ 0⤋
Sprinkle kitty litter over the oil and let absorb the stain...WORKS
2006-09-02 19:54:06 · answer #3 · answered by Anonymous · 0⤊ 0⤋
If it's a fresh stain, cover it with corn meal, let set overnight and wash it away with hot water.
2006-08-29 22:00:16 · answer #4 · answered by beez 7 · 0⤊ 0⤋
Mix a strong solution of Aquaklean and scrub with a push broom. Rinse and repeat if necessary.
http://www.kbs-coatings.com/Aqua-Klean-Info.aspx
2006-08-31 22:56:01 · answer #5 · answered by depotcopycat 3 · 0⤊ 0⤋
Go your local H.D. and get a degrease specially made for drive ways.. all you do is put it on the spot and for a few minutes and hose it down,, good luck
2006-08-29 21:41:10 · answer #6 · answered by litehmusicdj 3 · 0⤊ 0⤋
Use AquaKlean, the best cleaner & degreaser on the planet. Environmentally safe as well.
buy:
http://www.kbs-coatings.com/Prep-Products-C28.aspx
2006-08-29 23:08:04 · answer #7 · answered by Anonymous · 0⤊ 0⤋
spread sawdust and leave it there for at least 24 hrs. clean it up and wash down with a pressure washer.
2006-08-29 21:43:54 · answer #8 · answered by gert14 2 · 0⤊ 0⤋
cat litter/ dawn soap a scrub brush and water
I have had to do this before
2006-08-29 21:49:56 · answer #9 · answered by Aaron A 5 · 0⤊ 0⤋
half clorox and water let soak then high pressure spray
2006-08-29 21:43:15 · answer #10 · answered by blank 5 · 0⤊ 0⤋