I know absolutely NOTHING about cars, so make sure this explanation can be understood by a monkey. :)
I have a chip with an on/off switch, so I would like to have that near me in the driver's seat... But I don't know the first thing about how to do it. Where do the wires go? Where is the ECU? I don't know craaaap so please help. Thanks.
2006-08-29 10:05:28 · 6 answers · asked by JC 1 in Cars & Transportation ➔ Car Makes ➔ Acura
id take it in if your not sure
but it under the dash but if you want it up by you you will need to have it wired in and make up a clip to hook it to the ECU its not that hard to do
2006-08-29 10:18:24 · answer #1 · answered by grey_wolf54486 3 · 0⤊ 0⤋
Well, my boyfriend has a 03 RSX Type-S, and I find that the site: www.clubrsx.com has alot of information, especially the forums. If you register (free) to the discussions, you can ask alot of acura enthusiasts with alot of knowledge about these cars and they have Do-It-Yourself (DIY) forums and sometimes even installations and diagrams to help you out. Just do a search there. Hope I was helpful.
2006-09-02 04:46:49 · answer #2 · answered by Christine 2 · 0⤊ 0⤋
your ECU is inside your car.
have it installed by a professional if you dont know anything
check out team-integra.net (they talk RSX too..cuz rsx replaced the integra) they maybe a bit more help :)
2006-08-29 10:09:59 · answer #3 · answered by mommy2savannah51405 6 · 0⤊ 0⤋
well on most aftermarket chips you plug it into your OBD2 slot cuz wiring up a chip in your ECU may damage something like bad
2006-09-02 07:31:31 · answer #4 · answered by Insanity 2 · 0⤊ 0⤋
Check out http://www.clubrsx.com/merchant.mvc?Screen=SFNT&Store_Code=CR They have all sorts of technical information on installing parts in an RSX
2006-08-29 23:31:27 · answer #5 · answered by Anonymous · 0⤊ 0⤋
http://www.honda-tech.com/
2006-08-29 13:56:54 · answer #6 · answered by geetarpicker04 3 · 0⤊ 0⤋