This message occurs whenever i start burning my CD. Then it says the burning process failed at whatever speed i set it to burn at.
2006-08-29 06:53:30 · 6 answers · asked by edward 2 in Computers & Internet ➔ Hardware ➔ Other - Hardware
that means that there was a problem with the drive lens and that the laser power was not set correctly. this occurs when the lens is dirty or the drive is faulty. Try cleaning the lens or getting it serviced......
2006-08-29 07:04:03 · answer #1 · answered by reevester 2 · 1⤊ 0⤋
Love could be very functional.. and so can interest be.. no remember what you're waiting about, this is the element that keeps you going.. the element that fuels you.. and once you spot you're growing close to to what you're waiting about.. it may take complete administration of you.. and also you get stuck up contained in the on the spot.. with out questioning each in certain situations, you in ordinary words act upon it.. you retain on along with your heart, leaving good judgment to the facet..
2016-12-05 21:47:47 · answer #2 · answered by Anonymous · 0⤊ 0⤋
You are using old dye disks the new dye disks are x32 to x52 speed or bad media other meaning the laser cannot calibrate the correct gap to sector it needs to burn on the dye on the disk the dye is the silver coating on a cd and the blue or silver coating on a dvd disk
2006-08-31 17:46:35 · answer #3 · answered by Anonymous · 0⤊ 0⤋
If you are not an advanced user, try going to options or settings and click on auto detect for the speed.
2006-09-02 03:45:27 · answer #4 · answered by m_d_mack 2 · 0⤊ 0⤋
dirty lens in the rom
needs cleaning first
then replacing if doesn't cure
2006-09-01 10:29:47 · answer #5 · answered by Anonymous · 0⤊ 0⤋
It means you need to visit www.nero.com and read the f'ing manual.
DUH
2006-08-30 10:25:47 · answer #6 · answered by Anonymous · 0⤊ 0⤋