My 04 Honda was aligned , what does the numbers mean the;
Caster is 3deg. 15deg+over - 45deg, the plus sign is over the negtive sign and the deg stan for the little o at the end of each number
2006-08-28 12:59:14 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
If those are the specs. it is saying 3.15 degrees positive caster. the plus or minus .45 means it can be as high as 3.60 degrees or as low as 2.70 degrees and still be considered within specs. i don't think you can adjust caster on that car, but either way as long as both sides are fairly equal there should no problems. caster will not cause tire wear, only a pulling problem.
2006-08-28 13:12:42 · answer #1 · answered by TonynNC 5 · 0⤊ 0⤋
Sounds like it has to be your SAI is the alignment part on a alignment computer. Especially when you are talking about Caster, then there is the Camber alignment that has to comply to being in the green zone. So in all order when aligning your car, everything has to be within Specs of the program.
2006-08-28 20:04:26 · answer #2 · answered by iwasjustawanderinman 2 · 0⤊ 1⤋
http://www.familycar.com/alignment.htm
there ya go, this will help
2006-08-28 20:04:20 · answer #3 · answered by Christian 7 · 1⤊ 0⤋