"Puzzle glue," then use that blue sticky stuff to hang them up. The blue putty stuff comes off easy without ripping, and you don't have to put a nail or tack through the picture.
2006-08-28 11:56:59
·
answer #1
·
answered by RamaLama 2
·
2⤊
0⤋
I think years ago my uncle placed puzzles on a STRONG piece of cardboard. paint the cardboard w/ a thin layer of household glue and slide the puzzle onto it like sliding a pizza onto a pan. let dry.
Pour a thin layer of polyurathane over the puzzle and let dry. maybe cover with a LARGE cardboard box to protect it from dust as it drys. The puzzle will look clean and shiny and will be permanately mounted. You can then hang it on a wall. An arts and craft store may have better supplies today that 20 yrs. ago but this idea worked.
2006-08-28 12:22:06
·
answer #2
·
answered by bob 2
·
0⤊
0⤋
art stores sell a glue that you put on top of a completed puzzle for such a thing. Glue the front and then glue the back on different pieces of cardboard or thin board for a backing to hang the puzzle.
2006-08-28 11:57:44
·
answer #3
·
answered by Vladdy 2
·
0⤊
0⤋
Puzzle glue on a Cardboard backing -- get those colored cardboard pieces from Wal-Mart or Target or your local discount store -- and cut it about an inch or two wider than the glued on puzzle - it will look like it is framed, and you can then hang it on the wall as is!
2006-08-28 16:20:25
·
answer #4
·
answered by sglmom 7
·
0⤊
0⤋
I used to use puzzle glue but lost mine in a move so I used plain old Elmer's Glue. Make sure it says drys clear. I bought mine at Walgreen's for 99cents on sale. All I did was cover a board (plywood) with wax paper then poured glue onto puzzle and spread with a inch wide paint brush covering completely with fairly thick coat. Even over the edge as long as its on the wax paper. Let it dry completely then I sprayed with clear coat just to make it shiny. I have 5 spiderman puzzles hanging in my son's room right now.
2006-08-28 15:02:07
·
answer #5
·
answered by trouble421muah 2
·
0⤊
0⤋
Some people mix white elmers glue with a little bit of water and spread it on the back and let it dry. Then all the pieces stay together and you can hang them up. Or if you want it a little stiffer after gluing spray some mounting spray on foam board cut to size and hang them up that way.
2006-08-28 11:58:57
·
answer #6
·
answered by Connie B 1
·
0⤊
0⤋
Protect them with an inexpensive polyurethane spray and on the outer rim, use an attractive jute type string for the frame.. could really use any type of string.. thick or thin.. braded look, furry look with that thick yarn string that's soo cute in all colors.. could use the cross stitching string and make an attractive bracelet.. I know you'd have to make a long one to case around the entire puzzle but the string is only 14 cents for several yards..
Oh I have another idea.. how about broken pieces of tile .. ceramic tiles.. mirrored tiles, marble tiles.. just an idea. :D
hope that inspires your thoughts a bit.. have fun with it. :D
2006-08-28 12:00:52
·
answer #7
·
answered by Min 4
·
1⤊
0⤋
Get puzzle glue and some type of 2 sided tape/foam pads from 3-m
2006-08-28 11:57:34
·
answer #8
·
answered by KLD it. 4
·
0⤊
0⤋
go to any hobby store and buy some puzzle glue. you put it over the whole puzzle and it holds it together. im not sure how well it will protect it over time though.
2006-08-28 11:58:26
·
answer #9
·
answered by princess_6972 2
·
0⤊
0⤋
Puzzle glue works good. You can also glue them down to poster board. I like to add glitter to certain areas to highlight the puzzle.
2006-08-28 11:59:04
·
answer #10
·
answered by railcar_exp 4
·
0⤊
0⤋