2006-08-28 07:28:12 · 3 answers · asked by Ian B 1 in Cars & Transportation ➔ Maintenance & Repairs
There should be two adjustment screws with torx heads [you can buy the tool for these these cheap at just about any parts store] and a spring around those bulbs on each side. park on level ground about 12 feet from {preferably} a cenderblock wall. measure the height of the center of your bulbs and mark the same on the wall then just get your low beams to be about 1/2 inch under the mark and your high beams to be about 1/2 inch above it. You can then take kite string and run it from the outside of your rear tire to just touching the outside of your front tire continuing on till you can mark that place on the wall and keep the center of your beam just barely inside these marks.
2006-08-28 07:47:30 · answer #1 · answered by Gary Gearfreak 3 · 1⤊ 0⤋
There should be two screw; one above or below each light, and the other to the left or right. tighten and loosen these to adjust.
2006-08-28 14:38:26 · answer #2 · answered by dicanus1 2 · 0⤊ 0⤋
with the ajustment screws that is a part of the headlight asmebly
2006-08-28 14:42:35 · answer #3 · answered by mike L 4 · 0⤊ 0⤋