1996 ford e-150 van cruise control not functioning checked the fuses and brake lights already
2006-08-27 17:51:12 · 5 answers · asked by freonmike 2 in Cars & Transportation ➔ Maintenance & Repairs
This could be a ton of things. Most likely if you have checked the fuse and found that to be ok it may be a bad switch.
2006-08-27 17:58:42 · answer #1 · answered by Anonymous · 0⤊ 1⤋
check the switch mounted on the front of the brake master cylinder, You know the one that causes the Ford cars and trucks to burn up, Pull the connector off, Is there brake fluid leaking in it?
If so replace it AND Find out if it is covered under a RECALL warranty thru Ford
Also the cable from the servo is a common failure and so is the amplifier which is available separately from the complete cruise control servo itself.
2006-08-28 02:01:29 · answer #2 · answered by Magikmann 4 · 0⤊ 0⤋
check the vacuum line going to the cruise control unit or the speed sensor may be bad but the speedo usually will not work right either
2006-08-28 01:08:05 · answer #3 · answered by shane w 1 · 0⤊ 1⤋
ITS A FORD ,,,,,,,,,,,,,,,, Found On Road Dead
2006-08-28 00:55:36 · answer #4 · answered by txdiamonds4ever 2 · 0⤊ 1⤋
because it is old dumb ***!!!!!!!
2006-08-28 01:03:17 · answer #5 · answered by arian 1 · 0⤊ 1⤋