i changed my crank shaft sensor and one of my coils and my car is not getting any fire ,what could be the problem on a 92 lasabre buick.do i get another ignition modulator and coil pack along with the new sensor i got ?or could it be somthing else?
2006-08-27 05:17:57 · 8 answers · asked by imbossy 1 in Cars & Transportation ➔ Maintenance & Repairs
my vote is the module under the ignition coils.. all it is, is an electrical switch and they have a habit of going bad..
2006-08-27 12:23:02 · answer #1 · answered by gearbox 7 · 0⤊ 0⤋
you could have a bad wire(feeding the coil pack)check the harness.To determine if the coil pack is bad pick up a used coil pack from a junk yard(coil pack's don't go bad often)a coil pack goes bad if moisture got into it,or if it was improperly wound when built either way it would be internal heat dissipation failure.I would pick one up out of the local junk yard for it to replace the dead pack before buying a new one .
I am betting on a bad coil pack or wiring harness having a broken feed to the coil pack it'self and nothing else.
now on the other hand if you have a distributor equiped engine I would change the 4 wired black module inside the distributor that is opposite the pick up coil and reluctor
first before changing the coil in the cap.This black module controls the coil and pick up module as a whole .
2006-08-27 05:51:23 · answer #2 · answered by dinosaur 4 · 0⤊ 0⤋
Seems you are spending money on needless parts.Have the car towed to a GOOD Buick mechanic,have an engine analysis done,and go from there.
I know,I know the expense,but in the LONG run,you WILL save money!
2006-08-27 05:27:25 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Oh my gosh, I had that same car and the same problem. We spent over $2,000 trying everything to fix it and it still didn't go. Try to sell it now and someone may think they know how to fix it and buy it for a few hundred. That's about all the advice I have sorry. Best wishes
2006-08-27 05:20:49 · answer #4 · answered by colorist 6 · 0⤊ 0⤋
simply remove the radiator cap and put a Ford under it
problem solved
2006-08-27 05:20:21 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Change your spark plugs and wires, check your fuel filter.
2006-08-27 05:20:26 · answer #6 · answered by Anonymous · 0⤊ 0⤋
it time to change your starter to get fire and cud also be that spark plug need changing, those two things will get betsy going again.
2006-08-27 05:28:42 · answer #7 · answered by blklove1219 2 · 0⤊ 0⤋
the spark plugs could be fouled..or the wires also maybe bad...
2006-08-27 05:20:09 · answer #8 · answered by mommy2savannah51405 6 · 1⤊ 0⤋