Hi
I need some Advice I have light tint windows in my car and now it has bubbles inside and is coming off how can I fix that.
2006-08-27 03:49:00 · 8 answers · asked by anita_oehm 1 in Cars & Transportation ➔ Car Makes ➔ Pontiac
The only way to fix the tint correctly is to remove and replace it!
2006-08-27 03:54:15 · answer #1 · answered by fire4511 7 · 2⤊ 0⤋
If this was something you just recently had done, don't worry about it that's supposed to happen. They will be gone in a couple of days...don't roll your windows down until they go away though. If the tint is really old and it just started bubblling then the only solution would be to replace the tint. Hope that helps
2006-08-27 10:55:58 · answer #2 · answered by Passionfire 3 · 0⤊ 0⤋
Use a pin to poke a tiny hold in the center. Spray the window with soapy water, use a credit card to gently "rub" the bubble flat! Tadaa all gone! If the bubble is very small a hair dryer will usually make it flat.
2006-08-30 15:36:15 · answer #3 · answered by Gregg H 3 · 0⤊ 0⤋
Take a razor or sharp knife, cut a little tiny bit of the bubble, then press on the bubble and it should be fixed.
2006-08-27 10:56:51 · answer #4 · answered by ? 6 · 0⤊ 0⤋
take it back to the installer and demand a refund, go to a reputable tint installer
2006-08-27 10:53:11 · answer #5 · answered by hobidimofo 1 · 0⤊ 0⤋
remove the cheap tint covers.
they look silly, they're for kiddies and they don't look good.
2006-08-27 10:54:28 · answer #6 · answered by Anonymous · 0⤊ 0⤋
With a hammer.
2006-08-27 10:54:36 · answer #7 · answered by jinxybear 2 · 1⤊ 1⤋
scrape it off and try again.
2006-08-27 10:54:22 · answer #8 · answered by ceprn 6 · 0⤊ 0⤋