English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I am only working on the car for a friend so I dont want the expense of buying something unnecesary and the owner is a pensioner so she can do without the expence

2006-08-27 01:48:24 · 4 answers · asked by studenttrucker 1 in Cars & Transportation Maintenance & Repairs

4 answers

At a Renault dealer if you can find one. If you do, ask 'em for a printout of the exploded view. You might have to pay for it, however.
Mack

2006-08-27 01:58:35 · answer #1 · answered by Mack 5 · 0 1

After the transmission is removed you have jack stands, floor jack and a friend .Four parts how could you go wrong? throw out bearing in the bellhousing operated by a lever clean and re grease the tube and contact points so it slides smoothly then the other two parts clutch cover bolted around the rim with six to eight 6mm x 15mm long bolts then under the clutch cover driven plate or clutch disk there is a flywheel side and cover side center has springs to soften the engagement uasally faces away from the flywheel bolts.And in the center of the flywheel/crank shaft pilot bronse bushing or bearing a little tricky pulling out but worth in for a good job. You are trying to do this cheeply flywheel resurfacing might not be necessary if there are no blue or dark burnt spots or cracks visiable on the flywheel. You should be able to find a complete kit with all the parts and a plastic clutch alignment tool. Good luck

2006-08-27 02:04:32 · answer #2 · answered by John Paul 7 · 0 0

Go to the library.They will have it there.

2006-08-27 02:02:42 · answer #3 · answered by Mark ABC 2 · 0 0

duh on the inter-net

2006-08-27 01:55:37 · answer #4 · answered by Anonymous · 0 1

fedest.com, questions and answers