do i need to have any work done to my engine before installing a nitrous kit,?

Answer 1

prob depends on the kit and how big a shot ur giving it, if ur getting a progressive nitrous kit installed thn ur not goin to suddenly whack ur engine with a jolt of power and thus it would prob hold up. if ur gettin a purge kit where its jst a case if whacking the nitrous in thn id strengthen the engine as its gna take a beating. either way if ur gna be safe id strengthen it thn itd be reliable n could allow for bigger nos jets later on or more mods. try contactin the likes of dastek or summat, ive bn to thm b4 bout stuff and ur not pressured into buyin n u get the right advice from ppl who know btr, also make sure u upgrade ur brakes n suspension...no point goin fast if the car cant handle it

Answer 2

If your engine is in good condition then, no work required, If more likely your engine is a bit worn, a full or partial rebuild IS needed, if you don't you WILL destroy your engine sooner rather than later,
Don't forget about uprating the suspension and brakes either, or you may be going too fast with cr@p brakes, not good!

Answer 3

you will prob need to have your timing retarded before you spray or youre going to ping like crazy. This is usually done with the ECU.

Answer 4

how old is the engine, how big of a shot are you installing?

Answer 5

no but be prepared to replace it.nitrous is for racing.race cars are at a big risk.

Answer 6

Yes. lots.
other wise BANG.

Answer 7

You probably don't need your brain retarding!

Answer 8

yes if you want it to be reliable

Answer 9

nah, probably will do afterwards though...