I have a AN8 SLI, NVIDIA NF4 SLI Based AMD Athlon 64/64FX Mainboard, 2GHz HT, Dual DDR400, NVIDIA SLi Technology, SATA 3G RAID, NV GbE, NV Firewall, IEEE1394a, ABIT µGuru™, ABIT Q-OTES and AudioMAX, I have loaded the bios but now I have an error pop stating: address line is already enabled please write back thanks
2006-08-26 10:05:20 · 3 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Desktops
Maybe a hardware conflict? If you have spare parts start swapping them out 1 part at a time until you find the culprit. Bench test the mainboard with the different components before re-installing it.
2006-08-26 11:01:54 · answer #1 · answered by mittalman53 5 · 0⤊ 0⤋
Start out w/ basics. Remove all additional peripherals. See if system will start w/ just the motherboard and hard drive. From there add in cards and devices one by one until the error occurs again. If running "barebones" works it is likely a conflict w/ devices. If you get an error with a barebones setup the problem is with the motherboard.
2006-08-26 13:53:25 · answer #2 · answered by romeohsdrumline 3 · 0⤊ 0⤋
go back into bios and reset factory defaults
2006-08-26 11:13:46 · answer #3 · answered by rsist34 5 · 0⤊ 0⤋