How can I get my tool off?
2006-08-26 03:36:50 · 12 answers · asked by Mr. KnowItAll 7 in Cars & Transportation ➔ Maintenance & Repairs
First head down to the local auto parts store and get a wrench handle stretcher. Then apply it to your welch wrench. Once wrench has been removed, run inside to the refridgerator and grab an ice cold Bud light. Pop the top, sit back and think about it for a while
2006-08-26 03:46:47 · answer #1 · answered by zeuster2 3 · 0⤊ 0⤋
You need a left handed crescent wrench, you know, the one where the thumb wheel runs backward.
2006-08-26 16:35:39 · answer #2 · answered by buzzard 2 2 · 0⤊ 0⤋
get a left handed monkey wrench and hit ur self over the head
2006-08-26 11:06:24 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Remove the middle knivity pin.
2006-08-26 10:39:01 · answer #4 · answered by expatmt 5 · 0⤊ 0⤋
You can get your tool off by using Vaseline and apply a vigorous up & down motion on it. This will get your "TOOL" off !!!!!!!
2006-08-26 13:13:22 · answer #5 · answered by trannyman166 3 · 0⤊ 0⤋
You need a dyfristixcoagulator.. get the heavy duty one...saw one on ebay for $9.99 plus s&h
2006-08-26 10:57:00 · answer #6 · answered by Dirtydog 5 · 0⤊ 0⤋
go out and grab your metal stretcher that will pull it right off
2006-08-26 10:46:14 · answer #7 · answered by Anonymous · 0⤊ 0⤋
i just heard the 2 point buzzer go off.
2006-08-26 10:41:51 · answer #8 · answered by dodge man 7 · 1⤊ 1⤋
Use a can of bulkhead remover!
2006-08-26 10:43:41 · answer #9 · answered by jihad_against_muslims 3 · 0⤊ 0⤋
are you using the proper oil pan puller ?
2006-08-26 10:41:09 · answer #10 · answered by aBranch@60-WA ,<>< 4 · 0⤊ 0⤋