2006-08-25 16:58:00 · 11 answers · asked by Anonymous in Home & Garden ➔ Do It Yourself (DIY)
there are 2 types
die: it has threaded teeth on the inside of a hex nut like structure and cuts threads into the outside of a pipe. it is threaded on much like you would thread a nut on a bolt, but it has handles on the sides to get the proper torque
tap: its a round shaft with threaded teeth, much like a screw. it has a T handle on one end and it is threaded into the pipe to put threads on the inside.
the larger ones, meant for pipes in large buildings, are on stands and are motorized. below is a google image search for pipe threader. those are pipe threaders
2006-08-25 20:33:37 · answer #1 · answered by Stand-up Philosopher 5 · 1⤊ 0⤋
A manual threader looks like a thick ring, big enough to go outside of the pipe that it is threading. There is a cutting edge inside and handles sticking out to give leverage. Basically you turn the threader on male end of the pipe and it cuts the thread into the pipe. It's not an easy task and the threader has to be kept straight.
You can buy a threader for various sizes of pipe, just do a search.
2006-08-25 17:06:34 · answer #2 · answered by Paul D 5 · 1⤊ 0⤋
It cuts a groove in the pipe that matches other pipe fittings theaded parts- If you want to see one- Go to a Hardware Store, buy a piece of pipe and have them thread it- they do it all the time, and nothing like a good visual demonstration.
2006-08-26 01:57:52 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Pipe Threader, Ratchet
A handle that is usable with a variety of die sizes, with a ratchet that can turn a die, even when it cannot do a full turn. Used with a die, it cuts threads into pipe ends.
2006-08-25 17:20:22 · answer #4 · answered by littleangelfire81 6 · 0⤊ 0⤋
Its a tool with a handle that you put on the end of the pipe to put theads on the pipe It is like a tap but out side theads instead it is also tappered threads that will be on the pipe to be more proper 3quarter taper witch is 3/4 of a inch per foot.. I hope that helps..
2006-08-25 17:08:01 · answer #5 · answered by The Man 2 · 0⤊ 0⤋
it is a die that cuts tapered threads on pipe after you cut it to length, if your this unsure of things you don't need to try it yourself, go to the library and read up on the process first, then attempt the repair... when you understand the process get the cutter and die set from harbor freight or a like store in your area, don't run gas pipe till your sure of yourself!
2006-08-29 15:08:06 · answer #6 · answered by Michael S 4 · 0⤊ 0⤋
To thread O.D. on a pipe. It is called a die.. To thread the I.D. it is called a tap. You can buy a complete Tap & Die set at Sears or just the size that you need.. hope this helped!!!
2006-08-25 17:06:07 · answer #7 · answered by Bluechip D 2 · 1⤊ 0⤋
dye tool for cutting inside and outside threads on pipe for end caps or male / female selves
2006-08-25 17:04:43 · answer #8 · answered by lugwrench3@verizon.net 3 · 0⤊ 0⤋
there are two types one is electric and it also works on hydraulics the other type is manual but its hard for me to explain it would be easier if you would go to a hard ware store and have some one there what it is and how to use it sorry i couldnt be more help
2006-08-25 17:06:57 · answer #9 · answered by Neil G 6 · 0⤊ 0⤋
it adds the grooves to the metal tube - either inside or outside of the tube - that allow the tubes to connect to each other, and other fixtures.
2006-08-25 17:04:23 · answer #10 · answered by Anonymous · 0⤊ 0⤋