2006-08-25 14:14:27 · 8 answers · asked by Mr Beasley 1 in Cars & Transportation ➔ Maintenance & Repairs
NO !!!!!!! But it is your car, you can do what you want !!!!!!!!!
2006-08-25 14:50:28 · answer #1 · answered by john l 5 · 0⤊ 0⤋
It is not recommended. A blown head gasket, if driven, can etch the block making it necessary to machine the "deck" for a new gasket to seal. The intake is not as bad, but it could cause a lean problem in one cylinder and burn a valve or blow a hole through the piston.
2006-08-25 21:20:29 · answer #2 · answered by mad_mav70 6 · 0⤊ 0⤋
not a good idea u can get it fixed now for a lot cheaper than a new motor which is what u will need if u drive the car with either of these blown
2006-08-25 21:22:44 · answer #3 · answered by mac 3 · 0⤊ 0⤋
no you can not it my move but if its a intake gasket it will end up in your oil then big problems head gasket same deal bent rods bad bearings end result new motor take to mech have towed
2006-08-25 23:54:31 · answer #4 · answered by gobes691 1 · 0⤊ 0⤋
no!!! if you do not fix, you will blow out your engine!!! Save the car and money, the head gasket should be about $400 or so.
2006-08-25 21:18:07 · answer #5 · answered by deadcars42 3 · 0⤊ 0⤋
no - will blow up engine which costs a whole lot more than head gasket--if it's alluminum will be tricky to find someone to do it right
2006-08-25 21:22:32 · answer #6 · answered by phyllis_neel 5 · 0⤊ 0⤋
Bad, bad idea. It will only worsen the problem, probably overheat the engine and cause total engine failure.
2006-08-25 21:18:41 · answer #7 · answered by Anonymous · 0⤊ 0⤋
you won't have any power, and it will cause more damage.
2006-08-25 21:20:41 · answer #8 · answered by rhino_man420 6 · 0⤊ 0⤋