2006-08-25 13:34:00 · 6 answers · asked by nick a 1 in Computers & Internet ➔ Hardware ➔ Printers
First you should tell us the model of the Printer to be able to help, but, normally you should do the following:
» check where you can open the printer and view its inside
» open the lid / cover
» depending on your printer model, you should have from 1 to 4 cartridges
» checkoout the way its placed in ... as in directions and what is facing the top
» remove the empty cartidge - note that there way be a flip that holds the cartridge in place, make sure you remove it if it exists
Be gentle while removing it - some may require you to move the cartridge towards you to remove it from place
» get the new cartridge and remove the protecting seal from the bottom of it
» place the new ink cartridge in place and make sure that the security lock [flap] is set in the right position - if exists
» If not sure whether the cartridge is placed properly of not, try shaking / pulling it...if it moves with ease, then you didn't install it properly
Hope this helps...
Good Luck!
2006-08-25 13:46:24 · answer #1 · answered by ...Sky the Limits... 5 · 0⤊ 0⤋
...Sky pretty much wrote a manual but i think i can add one thing. Some ink cartridges have instuctions to shake them well before inserting. This can help prevent head clogging and provide better color accuracy.
2006-08-25 21:29:24 · answer #2 · answered by atamayojr 1 · 0⤊ 0⤋
Go to the manufacturers web site.
2006-08-26 08:00:37 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Take the old cartridge out, then out the new cartridge in!!!
2006-08-25 20:39:33 · answer #4 · answered by Geist 6 · 0⤊ 0⤋
Check your documentation.
Instructions are usually included with the cartridge (or refill).
2006-08-25 20:39:22 · answer #5 · answered by Anonymous · 0⤊ 1⤋
oh please read your book or manual
2006-08-26 08:28:33 · answer #6 · answered by sockbeen 2 · 0⤊ 0⤋