its a 96 dodge caravan the hood is somewhat popped out the hood is not cracked or anything would it be possible to push it back into place? or would i have to get a new one?
2006-08-25 11:01:15 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
Try it,what do you have to lose.
2006-08-25 11:07:00 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I recommend inspecting the mounts for the hood for bends or breaks. Also check the latch and see if it is hindering the hood from closing. In these situations only the damaged areas would need to be replaced, which would be considerably cheaper than a new hood. The only situation that would recquire a new hood is if the hood is physically bent upwards and that might even be mendable with a little elbow grease (if willing). Good Luck.
2006-08-25 18:08:29 · answer #2 · answered by Anonymous · 0⤊ 0⤋
If the hood is not fitting flush in the down or locked position, try lubricate on the hinge pivots.
2006-08-25 18:23:01 · answer #3 · answered by Anonymous · 0⤊ 0⤋
as long as there is no crease you can pop it back in place.
2006-08-29 15:22:10 · answer #4 · answered by duc602 7 · 0⤊ 0⤋