Please explain the difference between G.S.M & CDMA!!!?

Question

What kind does Airtel,Idea etc offer?What makes the TATA & Reliance phones different,they come with some sort of a fixed SIM card,na???

Answer 1

GSM uses sim caard. Cdma hoes not.

GSM is most popular around the world. Often you use these phones in other countries.

CDMA is know for powerful data features. For instance you get high speed internet service.

Answer 2

1

Answer 3

Global System for Mobile Communication.

GSM is one of two major mobile phone technologies in the U.S. The other is CDMA. Cingular and T-Mobile use GSM. Sprint and Verizon use CDMA. GSM is more prevalent in most other parts of the world, and especially in Europe. GSM phones require a SIM card to work.

Code-Division Multiple Access.

CDMA is a digital wireless technology. It is a general type of technology, implemented in many specific technologies. But the term "CDMA" is also commonly used to refer to one specific family of technologies (IS-95 and CDMA2000) that competes with technologies such as GSM.

Answer 4

GSM is a more advanced service distributor which runs off of not only towers put up to allow reception but off of satelite communication. CDMA is the oldest type of communication transfer, (what all cell phones ran off of before, but till present time have been upgraded and more have been built) Cingular and T-mobile run off of GSM which stands for Global Systems for Mobile communications (i worked for cingular for 2yrs, 2yrs ago) and CDMA means Code Division Multiple Access and Nextel and verizon are the ones that still run off of it!

Answer 5

GSM is not more advance than CDMA.
t-mobile= gsm (drop call all the time)
cingular=gsm( bad reception)
sprint and verizon=cdma( best reception u can get)

Answer 6

GSM is a more advanced than cdma

Answer 7

3

Answer 8

2

Answer 9

i enjoy GSM Better. CDMA you cant change sim cards can you?

Answer 10

note: if you realy want to understand the gsm and cdma you have to read this long answer and not get bored !

GSM :
The Global System for Mobile Communications (GSM) is the most popular standard for mobile phones in the world. GSM service is used by over 2 billion people across more than 210 countries and territories [1] [2]. The ubiquity of the GSM standard makes international roaming very common between mobile phone operators, enabling subscribers to use their phones in many parts of the world. GSM differs significantly from its predecessors in that both signaling and speech channels are Digital call quality, which means that it is considered a second generation (2G) mobile phone system. This fact has also meant that data communication was built into the system from very early on. GSM is an open standard which is currently developed by the 3rd Generation Partnership Project (3GPP).


The GSM logo is used to identify compatible handsets and equipmentFrom the point of view of the consumer, the key advantage of GSM systems has been higher digital voice quality and low cost alternatives to making calls such as text messaging. The advantage for network operators has been the ability to deploy equipment from different vendors because the open standard allows easy inter-operability. Like other cellular standards GSM allows network operators to offer roaming services which mean subscribers can use their phones all over the world.

As the GSM standard continued to develop, it retained backward compatibility with the original GSM phones; for example, packet data capabilities were added in the Release '97 version of the standard, by means of GPRS. Higher speed data transmission has also been introduced with EDGE in the Release '99 version of the standard.

Contents [hide]
1 History
2 Radio interface
3 Network structure
3.1 Subscriber identity module
3.2 GSM security
3.3 Patent issues
4 See also
5 External links



[edit]
History
Throughout the evolution of cellular telecommunications, various systems were developed without the benefit of standardized specifications. This presented many problems directly related to compatibility, especially with the development of digital radio technology. In 1982, The GSM group ("Groupe Spécial Mobile" (French) 1, 2, 3 and 4) was formed to address these problems. The name of the system comes from the name of this group, though later the decision was made to keep the initials but to change what they stood for. Originally the group was hosted by European Conference of Postal and Telecommunications Administrations (CEPT).

From 1982 to 1985 discussions were held to decide between building an analog or digital system. After multiple field tests, a digital system was adopted for GSM. The next task was to decide between a narrow or broadband solution. In May 1987, the narrowband time division multiple access (TDMA) solution was chosen.

By the mid-1980s, many of the European countries had developed their own systems. This led to disagreement on what system to use. The conflict almost stopped the project. However, the European Union intervened and all 15 countries decided to choose the standard recommended by CEPT. In February 1987, eight different systems were tested in a competition held in Paris. A system developed by researchers Torleiv Maseng and Odd Trandem at the Norwegian University of Science and Technology won and was chosen. This was particularly surprising as they had no industry backing. Their system won by its ability to counter signal reflection in urban areas and in mountainous terrain.

The technical fundamentals of the GSM system were defined in 1987. In 1989, the European Telecommunications Standards Institute (ETSI) took over control and by 1990 the first GSM specification was completed, amounting to over 6,000 pages of text. Commercial operation began in 1991 with Radiolinja in Finland.

In 1998, the 3rd Generation Partnership Project (3GPP) was formed. Originally, it was intended only to produce the specifications of the next (third, 3G) generation of mobile networks. However, 3GPP also took over the maintenance and development of the GSM specification. ETSI is a partner in 3GPP.

GSM provides recommendations, not requirements. The GSM specifications define the functions and interface requirements in detail but do not address the hardware. The reason for this is to not limit the designers yet still make it possible for the operators to buy equipment from multiple suppliers.

[edit]
Radio interface
GSM is a cellular network, which means that mobile phones connect to it by searching for cells in the immediate vicinity. GSM networks operate in four different frequency ranges. Most GSM networks operate in the 900 MHz or 1800 MHz bands. Some countries in the Americas (including the United States and Canada) use the 850 MHz and 1900 MHz bands because the 900 and 1800 MHz frequency bands were already allocated.

The rarer 400 and 450 MHz frequency bands are assigned in some countries, notably Scandinavia, where these frequencies were previously used for first-generation systems.

In the 900 MHz band the uplink frequency band is 890-915 MHz, and the downlink frequency band is 935-960 MHz. This 25 MHz bandwidth is subdivided into 124 carrier frequency channels, each spaced 200 kHz apart. Time division multiplexing is used to allow eight speech channels per radio frequency channel. There are eight radio timeslots (giving eight burst periods) grouped into what is called a TDMA frame. The channel data rate is 270.833 kbit/s, and the frame duration is 4.615 ms.

The transmission power in the handset is limited to a maximum of 2 watts in GSM850/900 and 1 watt in GSM1800/1900.

GSM uses linear predictive coding (LPC). The purpose of LPC is to reduce the bit rate. The LPC provides parameters for a filter that mimics the vocal tract. The signal passes through this filter, leaving behind a residual signal. Speech is encoded at 13 kbit/s.

There are four different cell sizes in a GSM network - macro, micro, pico and umbrella cells. The coverage area of each cell varies according to the implementation environment. Macro cells can be regarded as cells where the base station antenna is installed on a mast or a building above average roof top level. Micro cells are cells whose antenna height is under average roof top level; they are typically used in urban areas. Picocells are small cells whose diameter is a few dozen meters; they are mainly used indoors. On the other hand, umbrella cells are used to cover shadowed regions of smaller cells and fill in gaps in coverage between those cells.

Cell radius varies depending on antenna height, antenna gain and propagation conditions from a couple of hundred meters to several tens of kilometers. The longest distance the GSM specification supports in practical use is 35 km or 22 miles. There are also several implementations of the concept of an extended cell, where the cell radius could be double or even more, depending on the antenna system, the type of terrain and the timing advance.

Indoor coverage is also supported by GSM and may be achieved by using an indoor picocell base station, or an indoor repeater with distributed indoor antennas fed through power splitters, to deliver the radio signals from an antenna outdoors to the separate indoor distributed antenna system. These are typically deployed when a lot of call capacity is needed indoors, for example in shopping centers or airports. However, this is not a pre-requisite, since indoor coverage is also provided by in-building penetration of the radio signals from nearby cells.

The modulation used in GSM is Gaussian minimum shift keying (GMSK), a kind of continuous-phase frequency shift keying. In GMSK, the signal to be modulated onto the carrier is first smoothed with a Gaussian low-pass filter prior to being fed to a frequency modulator, which greatly reduces the interference to neighboring channels (adjacent channel interference).

[edit]
Network structure

The structure of a GSM networkThe network behind the GSM system seen by the customer is large and complicated in order to provide all of the services which are required. It is divided into a number of sections and these are each covered in separate articles.

the Base Station Subsystem (the base stations and their controllers).
the Network and Switching Subsystem (the part of the network most similar to a fixed network). This is sometimes also just called the core network.
the GPRS Core Network (the optional part which allows packet based Internet connections).
all of the elements in the system combine to produce many GSM services such as voice calls and SMS.
[edit]
Subscriber identity module
One of the key features of GSM is the Subscriber Identity Module (SIM), commonly known as a SIM card. The SIM is a detachable smart card containing the user's subscription information and phonebook. This allows the user to retain his or her information after switching handsets. Alternatively, the user can also change operators while retaining the handset simply by changing the SIM. Some operators will block this by allowing the phone to use only a single SIM, or only a SIM issued by them; this practice is known as SIM locking, and is illegal in some countries.

In the United States, Europe and Australia, many operators lock the mobiles they sell. This is done because the price of the mobile phone is typically subsidised with revenue from subscriptions and operators want to try to avoid subsidising competitor's mobiles. A subscriber can usually contact the provider to remove the lock for a fee, utilize private services to remove the lock, or make use of ample software and websites available on the Internet to unlock the handset themselves. While most web sites offer the unlocking for a fee, some do it for free. The locking applies to the handset, identified by its International Mobile Equipment Identity (IMEI) number, not to the account (which is identified by the SIM card). It is always possible to switch to another (non-locked) handset.

Some providers in the USA and Europe, such as T-Mobile, Cingular and the three French Operators, will unlock the phone for free if the customer has held an account for a certain period. Third party unlocking services exist that are often quicker and lower cost than that of the operator. In most countries removing the lock is legal.

A curious exception to this rule is Belgium, where all phones are sold unlocked. However, it is unlawful for operators there to offer any form of subsidy on the phone's price. This was also the case in Finland until April 1, 2006, when selling subsidized combinations of handsets and accounts became legal though operators have to unlock phone free of charge after a certain amount of time (at most 24 months).

[edit]
GSM security
GSM was designed with a moderate level of security. The system was designed to authenticate the subscriber using shared-secret cryptography. Communications between the subscriber and the base station can be encrypted. The development of UMTS introduces an optional USIM, that uses a longer authentication key to give greater security, as well as mutually authenticating the network and the user - whereas GSM only authenticated the user to the network (and not vice versa). The security model therefore offers confidentiality and authentication, but limited authorization capabilities, and no non-repudiation.

GSM uses several cryptographic algorithms for security. The A5/1 and A5/2 stream ciphers are used for ensuring over-the-air voice privacy. A5/1 was developed first and is a stronger algorithm used within Europe and the United States; A5/2 is weaker and used in other countries. A large security advantage of GSM over earlier systems is that the Ki, the crypto variable stored on the SIM card that is the key to any GSM ciphering algorithm, is never sent over the air interface. Serious weaknesses have been found in both algorithms, and it is possible to break A5/2 in real-time in a ciphertext-only attack. The system supports multiple algorithms so operators may replace that cipher with a stronger one.

[edit]
Patent issues
In 2005, a number of companies Koshie (including Cisco Systems and Ericsson) were sued for infringement of U.S. Patent No. 5,561,706, for offering products alleged to be compliant with the GSM 3.60 standard.

CDMA :
Code division multiple access (CDMA) is a form of multiplexing (not a modulation scheme) and a method of multiple access that does not divide up the channel by time (as in TDMA), or frequency (as in FDMA), but instead encodes data with a special code associated with each channel and uses the constructive interference properties of the special codes to perform the multiplexing. CDMA also refers to digital cellular telephony systems that make use of this multiple access scheme, such as those pioneered by Qualcomm, and W-CDMA by the International Telecommunication Union or ITU.

CDMA has since been used in many communications systems, including the Global Positioning System (GPS) and in the OmniTRACS satellite system for transportation logistics.

Contents [hide]
1 Usage in mobile telephony
1.1 Coverage and technologies
2 Technical details
2.1 Code division multiplexing
2.2 Example
2.3 Soft handoff
3 CDMA features
4 See also
5 External links



[edit]
Usage in mobile telephony
A number of different terms are used to refer to CDMA implementations. The original U.S. standard defined by QUALCOMM was known as IS-95, the IS referring to an Interim Standard of the Telecommunications Industry Association (TIA). IS-95 is often referred to as 2G or second generation cellular. The QUALCOMM brand name cdmaOne may also be used to refer to the 2G CDMA standard. The CDMA has been submitted for approval as a mobile air interface standard to the ITU International Telecommunication Union.

Whereas the Global System for Mobile Communications (GSM) standard is a specification of an entire network infrastructure, the CDMA interface relates only to the air interface—the radio part of the technology. For example GSM specifies an infrastructure based on internationally approved standard while CDMA allows each operator to provide the network features as it finds suited. On the air interface, the signalling suite (GSM: ISDN SS7) work has been progressing to harmonise these.

After a couple of revisions, IS-95 was superseded by the IS-2000 standard. This standard was introduced to meet some of the criteria laid out in the IMT-2000 specification for 3G, or third generation, cellular. It is also referred to as 1xRTT which simply means "1 times Radio Transmission Technology" and indicates that IS-2000 uses the same 1.25 MHz shared channel as the original IS-95 standard. A related scheme called 3xRTT uses three 1.25 MHz carriers for a 3.75 MHz bandwidth that would allow higher data burst rates for an individual user, but the 3xRTT scheme has not been commercially deployed. More recently, QUALCOMM has led the creation of a new CDMA-based technology called 1xEV-DO, or IS-856, which provides the higher packet data transmission rates required by IMT-2000 and desired by wireless network operators.

The QUALCOMM CDMA system includes highly accurate time signals (usually referenced to a GPS receiver in the cell base station), so cell phone CDMA-based clocks are an increasingly popular type of radio clock for use in computer networks. The main advantage of using CDMA cell phone signals for reference clock purposes is that they work better inside buildings, thus often eliminating the need to mount a GPS antenna on the outside of a building.

The US CDMA system is frequently confused with a similar but incompatible technology called Wideband Code Division Multiple Access (W-CDMA) which forms the basis of the W-CDMA air interface. The W-CDMA air interface is used in the global 3G standard UMTS and the Japanese 3G standard FOMA, by NTT DoCoMo and Vodafone; however, the CDMA family of US national standards (including cdmaOne and CDMA2000) are not compatible with the W-CDMA family of International Telecommunication Union (ITU) standards.

Another important application of CDMA—predating and entirely distinct from CDMA cellular—is the Global Positioning System, GPS.

[edit]
Coverage and technologies
When it comes to cell size, this depends on the power used by the handset, the terrain and frequency. Effective algorithms can reduce the noise, but will require that extra information is sent to validate the transfer. Hence the radio frequency and power of the handset determines the cell size. The long waves need less energy to travel far - so lower frequencies are used to make larger cell. The higher the frequency - the shorter will the coverage be. This is used by mobile networks to vary the size of the cell. In cities you need many small cells, and high frequencies allows sites to be placed closer, and more subscribers provided service. On the country side, a lower frequency allows the same base station to provide broader coverage.See also Market situation section of GSM

Various companies use various variants of CDMA to provide fixed line network - using Wireless local loop WLL. Since they can plan with the maximum number of subscribers in the cell, and these are all stationary, this application of CDMA can be found in most parts of the world.

CDMA is suited for data transfer, with bursty behaviour, and where delays can be accepted. It is used in WLAN - and the cell size here is 500 feet because of the high frequency (2.4 GHz) and low power. The suitability for data transfer is the reason for why W-CDMA seems to be "winning technology" for the data part of 3G mobile networks.

[edit]
Technical details
[edit]
Code division multiplexing
Synchronous CDMA, or code division multiplexing (CDM) exploits at its core mathematical properties of orthogonality. Suppose we represent data signals as vectors. For example, the binary string "1011" would be represented by the vector (1, 0, 1, 1). We may wish to give a vector a name, we may do so by using boldface letters, e.g. a. We also use an operation on vectors, known as the dot product, to "multiply" vectors, by summing the product of the components. For example, the dot product of (1, 0, 1, 1) and (1, -1, -1, 0) would be (1)(1)+(0)(-1)+(1)(-1)+(1)(0)=1+-1=0. Where the dot product of vectors a and b is 0, we say that the two vectors are orthogonal.

The dot product has a number of properties, and one will aid us in understanding why CDM works. For vectors a, b, c:



The square root of a.a is a real number, and is important. We write


Suppose vectors a and b are orthogonal. Then:





[edit]
Example

An example of 4 orthogonal digital signals.Suppose now we have a set of vectors that are mutually orthogonal to each other. Usually these vectors are specially constructed for ease of decoding—they are columns or rows from Walsh matrices that are constructed from Walsh functions—but strictly mathematically the only restriction on these vectors is that they are orthogonal. An example of orthogonal functions is shown in the picture on the right. Now, associate with one sender a vector from this set, say v, which is called the chip code. Associate a zero digit with the vector -v, and a one digit with the vector v. For example, if v=(1,-1), then the binary vector (1, 0, 1, 1) would correspond to (1,-1,-1,1,1,-1,1,-1). For the purposes of this article, we call this constructed vector the transmitted vector.

Each sender has a different, unique vector chosen from that set, but the construction of the transmitted vector is identical.

Now, the physical properties of interference say that if two signals at a point are in phase, they will "add up" to give twice the amplitude of each signal, but if they are out of phase, they will "subtract" and give a signal that is the difference of the amplitudes. Digitally, this behaviour can be modelled simply by the addition of the transmission vectors, component by component. So, if we have two senders, both sending simultaneously, one with the chip code (1, -1) and data vector (1, 0, 1, 1), and another with the chip code (1, 1), and data vector (0,0,1,1), the raw signal received would be the sum of the transmission vectors (1,-1,-1,1,1,-1,1,-1)+(-1,-1,-1,-1,1,1,1,1)=(0,-2,-2,0,2,0,2,0).

Suppose a receiver gets such a signal, and wants to detect what the transmitter with chip code (1, -1) is sending. The receiver will make use of the property described in the above foundation section, and take the dot product to the received vector in parts. Take the first two components of the received vector, that is, (0, -2). Now, (0, -2).(1, -1) = (0)(1)+(-2)(-1) = 2. Since this is positive, we can deduce that a one digit was sent. Taking the next two components, (-2, 0), (-2, 0).(1,-1)=(-2)(1)+(0)(-1)=-2. Since this is negative, we can deduce that a zero digit was sent. Continuing in this fashion, we can successfully decode what the transmitter with chip code (1, -1) was sending: (1, 0, 1, 1).

Likewise, applying the same process with chip code (1, 1): (1, 1).(0,-2) = -2 gives digit 0, (1, 1).(-2,0)=(1)(-2)+(1)(0)=-2 gives digit 0, and so on, to give us the data vector sent by the transmitter with chip code (1, 1): (0, 0, 1, 1).

Asynchronous CDMA : The previous example of orthogonal Walsh sequences describes how 2 users can be multiplexed together in a synchronous system, a technique that is commonly referred to as Code Division Multiplexing (CDM). The set of 4 Walsh sequences shown in the figure will afford up to 4 users, and in general, an NxN Walsh matrix can be used to multiplex N users. Multiplexing requires all of the users to be coordinated so that each transmits their assigned sequence v (or the complement, -v) starting at exactly the same time. Thus, this technique finds use in base-to-mobile links, where all of the transmissions originate from the same transmitter and can be perfectly coordinated.

On the other hand, the mobile-to-base links cannot be precisely coordinated, particularly due to the mobility of the handsets, and require a somewhat different approach. Since it is not mathematically possible to create signature sequences that are orthogonal for arbitrarily random starting points, unique "pseudo-random" or "pseudo-noise" (PN) sequences are used in asynchronous CDMA systems. These PN sequences are statistically uncorrelated, and the sum of a large number of PN sequences results in Multiple Access Interference (MAI) that is approximated by a Gaussian noise process (via the theorem of the "law of large numbers" in statistics). If all of the users are received with the same power level, then the variance (e.g., the noise power) of the MAI increases in direct proportion to the number of users.

All forms of CDMA use spread spectrum process gain to allow receivers to partially discriminate against unwanted signals. Signals with the desired chip code and timing are received, while signals with different chip codes (or the same spreading code but a different timing offset) appear as wideband noise reduced by the process gain.

Since each user generates MAI, controlling the signal strength is an important issue with CDMA transmitters. A CDMA, TDMA or FDMA receiver can in theory completely reject arbitrarily strong signals using different codes, time slots or frequency channels due to the orthogonality of these systems. This is not true for CDMA; rejection of unwanted signals is only partial. If any or all of the unwanted signals are much stronger than the desired signal, they will overwhelm it. This leads to a general requirement in any CDMA system to approximately match the various signal power levels as seen at the receiver. In CDMA cellular, the base station uses a fast closed-loop power control scheme to tightly control each mobile's transmit power.

CDMA's main advantage over TDMA and FDMA is that it can use the spectrum more efficiently in mobile telephony applications. TDMA systems must carefully synchronize the transmission times of all the users to ensure that they are received in the correct timeslot and do not cause interference. Since this cannot be perfectly controlled in a mobile environment, each timeslot must have a guard-time, which reduces the probability that users will interfere, but decreases the spectral efficiency. Similarly, FDMA systems must use a guard-band between adjacent channels, due to the random doppler shift of the signal spectrum which occurs due to the user's mobility. The guard-bands will reduce the probability that adjacent channels will interfere, but decrease the utilization of the spectrum.

Most importantly, CDMA offers a key advantage in the flexible allocation of resources. There are a fixed number of orthogonal codes, timeslots or frequency bands that can be allocated for CDMA, TDMA and FDMA systems, which remain underutilized due to the bursty nature of telephony and packetized data transmissions. There is no strict limit to the number of users that can be supported in a CDMA system, only a practical limit governed by the desired bit error probability, since the SIR (Signal to Interference Ratio) varies inversely with the number of users. In a bursty traffic environment like mobile telephony, the advantage afforded by CDMA is that the performance (bit error rate) is allowed to fluctuate randomly, with an average value determined by the number of users times the percentage of utilization. Suppose there are 2N users that only talk half of the time, then 2N users can be accommodated with the same average bit error probability as N users that talk all of the time. The key difference here is that the bit error probability for N users talking all of the time is constant, whereas it is a random quantity (with the same mean) for 2N users talking half of the time.

In other words, CDMA is ideally suited to a mobile network where large numbers of transmitters each generate a relatively small amount of traffic at irregular intervals. CDMA, TDMA and FDMA systems cannot recover the underutilized resources inherent to bursty traffic due to the fixed number of orthogonal codes, time slots or frequency channels that can be assigned to individual transmitters. For instance, if there are N time slots in a TDMA system and 2N users that talk half of the time, then half of the time there will be more than N users needing to use more than N timeslots. Furthermore, it would require significant overhead to continually allocate and deallocate the orthogonal code, time-slot or frequency channel resources. By comparison, CDMA transmitters simply send when they have something to say, and go off the air when they don't, keeping the same PN signature sequence as long as they are connected to the system.

[edit]
Soft handoff
Soft handoff (or soft handover) is an innovation in mobility. It refers to the technique of adding additional base stations (in IS-95 as many as 5) to a connection to be certain that the next base is ready as you move through the terrain. However, it can also be used to move a call from one base station that is approaching congestion to another with better capacity. As a result, signal quality and handoff robustness is improved compared to TDMA systems.

In TDMA and analog systems, each cell transmits on its own frequency, different from those of its neighbouring cells. If a mobile device reaches the edge of the cell currently serving its call, it is told to break its radio link and quickly tune to the frequency of one of the neighbouring cells where the call has been moved by the network due to the mobile's movement. If the mobile is unable to tune to the new frequency in time the call is dropped.

In CDMA, a set of neighbouring cells all use the same frequency for transmission and distinguish cells (or base stations) by means of a number called the "PN offset", a time offset from the beginning of the well-known pseudo-random noise sequence that is used to spread the signal from the base station. Because all of the cells are on the same frequency, listening to different base stations is now an exercise in digital signal processing based on offsets from the PN sequence, not RF transmission and reception based on separate frequencies.

As the CDMA phone roams through the network, it detects the PN offsets of the neighbouring cells and reports the strength of each signal back to the reference cell of the call (usually the strongest cell). If the signal from a neighbouring cell is strong enough, the mobile will be directed to "add a leg" to its call and start transmitting and receiving to and from the new cell in addition to the cell (or cells) already hosting the call. Likewise, if a cell's signal becomes too weak the mobile is directed to drop that leg. In this way, the mobile can move from cell to cell and add and drop legs as necessary in order to keep the call up without ever dropping the link.

When there are frequency boundaries between different carriers or sub-networks, a CDMA phone behaves in the same way as TDMA or analog and performs a hard handoff in which it breaks the existing connection and tries to pick up on the new frequency where it left off.

[edit]
CDMA features
Narrowband message signal multiplied by wideband spreading signal or pseudonoise code
Each user has his own pseudonoise (PN) code
Soft capacity limit: system performance degrades for all users as number of users increases
Cell frequency reuse: no frequency planning needed
Soft handoff increases capacity
Near-far problem
Interference limited: power control is required
Wide bandwidth induces diversity: rake receiver is used


AT LAST :
airtel, hutch, idea, bsnl, spine, bpl, relaince smart, dolphin are gsm operators in India and relaine, tata are cdam in India

handset lesders are nokia in gsm and lg in cdma .

bye!