I was trying to print this picture of this logo & it had like a green gecho/lizard thing, and when I printed it the gecho came out a reddish color.
All of our ink is full, so that can't be the problem.
2006-08-25 06:29:41 · 11 answers · asked by Sonya 5 in Computers & Internet ➔ Hardware ➔ Printers
where is the head of my printer?
2006-08-25 11:26:39 · update #1
Is it a Chameleon you're trying to print?
Maybe it changed color.
2006-08-25 06:31:29 · answer #1 · answered by HotRod 5 · 1⤊ 0⤋
you need to be waiting to scrub the heads with the help of making use of the printer kit discovered interior the printer homes Having green in basic terms, looks like your shade cartridge isn't letting out something however the golf green shade. If all became into working fantastic the day previous and you haven't any longer replaced something, terrific determination is to run a cleansing on the heads with the help of making use of the printer application application. somewhat in many cases, that is in basic terms a clogged head that gets extra advantageous after the cleansing technique. while you at the instant are not making use of unique Ink Cartridges beware the very low priced ones, they are extra difficulty than they are somewhat worth. terrific of success and additionally remember to have a great number of paper to conflict by each and all the cleansing ideas
2016-12-17 17:06:30 · answer #2 · answered by alsobrook 4 · 0⤊ 0⤋
Try doing the Windows printer test page. If the XP logo is blue, yellow, red, and red with no green...Anyways, if otherwise, you're probably trying to print a chameleon, yeah. Or maybe you're printer doesn't like that picture.
2006-08-25 06:46:37 · answer #3 · answered by thingummy 1 · 0⤊ 0⤋
Your heads are dirty, plugged...try opening the printer tool box and clean heads...do NOT use generic ink in ink jets...plugs up the heads...IF you can get the heads clean, always turn your printer off when not in use..the heat from being on dries out the heads and plugs them. Good luck
2006-08-25 09:03:07 · answer #4 · answered by Anonymous · 0⤊ 0⤋
i would run the headcleaning of the printer this can normally be done via the all programs/
since one of the jets could be blocked, if the head cleaning does do it. get some white spirit and cotton buds and wipe it clean
2006-08-25 06:36:12 · answer #5 · answered by Paultech 7 · 0⤊ 0⤋
C'mon ladies, be specific when posting, like what kind of logo you like to print, what it original color, what kind of printer type you use and so on, so we don't waste our time trying to help you with silly answer.
- Witch don't use internet :-( -
2006-08-25 16:16:33 · answer #6 · answered by fuzzy 2 · 0⤊ 0⤋
Alright, you need to disconnect your printer from everything. Hit the side twice, kick it once, bang it against the wall three times, and kick it one more time. Reconnect and it's fixed.
2006-08-25 06:35:31 · answer #7 · answered by FlyChicc420 5 · 0⤊ 0⤋
check your ink or get it checked out, you could also calibrate your printer in printer settings.
2006-08-25 06:33:04 · answer #8 · answered by joejoeyjbgd 3 · 1⤊ 0⤋
clean your print head?
2006-08-25 06:32:06 · answer #9 · answered by guido_961 4 · 1⤊ 0⤋
I'll be right over to fix it.
2006-08-25 06:31:40 · answer #10 · answered by Anonymous · 0⤊ 0⤋