2006-08-25 06:12:42 · 5 answers · asked by Jeffrey R 1 in Cars & Transportation ➔ Maintenance & Repairs
I bought the three blets but not sure which goes where. All there blets broke off when I was going to work so I'm not sure how they where on. I just bought the jeep for a work car and haven't really got under the hood.
2006-08-25 06:30:12 · update #1
There are three belts for the v8 engine.
2006-08-25 06:31:33 · update #2
need more info what engine , does it have 1 belt or more
2006-08-25 06:21:09 · answer #1 · answered by canibus 2 · 0⤊ 0⤋
If you purchased the belts, the parts store should tell you which number belt applies to which accessory (i.e. Alternator, P/S, A.I.R, A/C etc.)
When you replace them, be certain to inspect the pulleys and accessories for damage.
It is possible that one or more of them may either be damaged from the belts breaking, or were the cause of the breakage. Check closely the water pump, and look closely at the harmonic balancer for integrity, as if it is loose, this could have been the cause, and will do it again, possibly doing more damage (eg. radiator?)
2006-08-25 14:04:37 · answer #2 · answered by Ironhand 6 · 0⤊ 0⤋
Most manufacturers put a sticker under the hood showing that. Damn Chrysler weenies.
2006-08-25 13:27:00 · answer #3 · answered by Anonymous · 0⤊ 0⤋
loosen the altinator bracket. the belt should slip right off with enought slack to get it around the fan blade.
2006-08-25 13:27:35 · answer #4 · answered by ? 2 · 0⤊ 0⤋
GOBACKWHEREYOUGOTTHEBELTSANHSVELABELTHEM
2006-08-29 13:24:28 · answer #5 · answered by blackbutton100 4 · 0⤊ 0⤋