what would the cost be to repair a chevy colbalt 2006 door, with body and paint?

Answer 1

Wrecking yards like to sell complete doors make sure you ask about outside color you might even get a match inside door panel and all. Make sure they un plug the door not cut the harness. Various trim grades crank up windows premium radio and power locks can be moved from one door to the other. However GM uses these super strong pop rivets grind the heads off "wear eye protection always" and use 1/4 inch bolts and nuts and a little loctite tighten good so as not to shake loose. Or rent two handle two foot pop rivet tool and use new rivets for the window motor regulator assembly available from GM. on the one to ten scale I give this job a four. For grinding and re bolting and figuring what needs to be transfered and what does not and how the window glass comes out and back in.

Answer 2

Depends on the damage. If the damage is to bad you might have to get a replacement door for the car. Being so new, there might not be to many used one on the market right now.

If there is internal damage the cost will rise too.

But for a simple dent & paint you should be able to get it done for around $1200-1800.

Answer 3

this should be an issue for the insurance company to be dealing with ,, on that new of a car,,an honest answer cannot be given here,,because the parts for that car alone are going to be high,and labor will be ,,depending on if it has any inner structure damage,,as to where the door bolts on,,i own a repair shop,,and a restoration shop,,and some of the parts for these cars have scary prices on them,,i hope this help,s.

Answer 4

Depends where you live (city, state and country) Here in Mexico (country of Mexico and not the state of New Mexico) it would cost around 2000 peso or $200.00 US Dollars.

Answer 5

Depends on the amount of damage.

Answer 6

about three hundred

Answer 7

$1,700