2006-08-24 12:16:56 · 15 answers · asked by Lionheart12 5 in Home & Garden ➔ Do It Yourself (DIY)
Bolt cutters....the universal key.
2006-08-24 12:18:09 · answer #1 · answered by tsihilin 3 · 0⤊ 1⤋
Go to master lock web site. you'll need a picture of the lock with the serial # and some other info. If you need into the lock sooner than a couple of weeks then I would take any of these other answers.... most of them will work. then buy new lock. Here is the link to "lost Combinations".
2006-08-25 15:52:25 · answer #2 · answered by Spike 1 · 0⤊ 0⤋
I have popped a screwdriver under the dial an removed it. as far as a gun goes, have you ever watched the commercials during the super bowls, used to have a coke machine with a lock on it that thieves tried to shoot all the time, it always held, I had to use my torch to cut it off each time.
2006-08-25 23:17:06 · answer #3 · answered by Dave 4 · 0⤊ 0⤋
look up lock picking on the internet go to how to pick locks an there is a site that tells you how i seen it there
2006-08-24 19:25:11 · answer #4 · answered by hitlertoday 1 · 0⤊ 0⤋
do you know what a tire iron looks like? a 1/2 thick steel bar. insert and pull down. lock aint no good anymore.
2006-08-24 22:32:56 · answer #5 · answered by zocko 5 · 1⤊ 0⤋
drill the lock out
2006-08-24 19:51:57 · answer #6 · answered by tie003uk 1 · 0⤊ 0⤋
With a good touch and a little knowledge - it is fairly easy by trial and error.
I have done it many times. Not every time.
2006-08-24 21:41:18 · answer #7 · answered by captbryguy 5 · 0⤊ 0⤋
Call a key man or you can try using a stick and knock it brick it try all the number try like 1234 ,2456,103654, try it .
2013-10-27 10:36:56 · answer #8 · answered by Anonymous · 0⤊ 0⤋
you can brake it,get a lock smith,use a magenet,or call the company
2006-08-28 00:53:50 · answer #9 · answered by lalapop95 2 · 0⤊ 0⤋
Smith and Wesson .44 magnum should do it.
2006-08-24 19:18:25 · answer #10 · answered by slandguy 3 · 0⤊ 1⤋