English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

its on the passager side.....not the actual part just the glass need to be replace

2006-08-23 00:49:56 · 8 answers · asked by cute_dimples526 1 in Cars & Transportation Maintenance & Repairs

its on the outside of the passager side....just the glass though.....would i have to replace the whole thing or just the glass.......and is it very costly?

2006-08-23 00:58:13 · update #1

my car is a 1999 hyuandi elantra/gl

2006-08-23 01:09:33 · update #2

8 answers

Go to any glass shop in your area. They should be able to cut a mirror to fit and glue it in.

2006-08-23 07:44:34 · answer #1 · answered by Beware the fury of a patient man 6 · 1 0

some auto manufactures have replacement mirror lenses. Others do not. Most mirror backings pull off of the motor or aiming device. Just where do you find out which morrors you can change just the glass lens i do not know. I find out when I go to the dealer to buy a new lens. Look close at the new lens just how it hooks and pops on balls,does it have springs? or just peel and stick after craking the broken lens off saftey first! wear eye protection around breaking glass. You might even find no glass is available and have to replace the entire assembly. Ask us again and year make model and we can tell you how to do that

2006-08-23 08:01:01 · answer #2 · answered by John Paul 7 · 0 0

If its the wing mirror then go to a motor parts store, they sell self adhesive mirror panels that will fit over the broken one.

2006-08-23 07:57:32 · answer #3 · answered by agtfos 3 · 0 0

Not sure what the deal is.....are you talking about the passenger side visor? Usually rear view mirrors are the mirror that is in the middle of the interior windshield......visors are on each side for driver and passenger, respectively....

2006-08-23 07:53:44 · answer #4 · answered by jrsgurl62 4 · 1 0

First order a new mirror from the dealer. When it arrives turn the old mirror so that you can grab it, then just pop it out, and snap the new one in.

2006-08-23 07:57:51 · answer #5 · answered by Anonymous · 0 0

go to any auto store they sell special glue just for that it works great i just did it on my car

2006-08-23 07:56:48 · answer #6 · answered by mike c 2 · 0 0

you have to go to the company.

i dont think a normal mechanic could do that

2006-08-23 07:55:18 · answer #7 · answered by Anonymous · 0 0

go to your parts store

2006-08-23 07:55:40 · answer #8 · answered by freeman3905@sbcglobal.net 6 · 0 0

fedest.com, questions and answers