2006-08-22 23:41:48 · 15 answers · asked by shihab s 1 in Computers & Internet ➔ Computer Networking
use back to back connection
2006-08-22 23:42:41 · answer #1 · answered by Musah B 2 · 0⤊ 0⤋
one of the copies of xp has to have a different copy of xp not the same one as the other computer cause it has somethng in the program that detects and will not work. to conect computer to computer only no Internet you need a cross over cat5 cable
and a network card in each computer
now if Internet with dialup then both would have to have a modem but only one computer could access the internet but you could pull file from the other computer or store files to the at computer and of course the network cards and the cat5 cross over cable
now the last one DSL 2 network cards 2 cat5 cables a 4 port 10/100 port network router/modem or just router then 1 more cat5 cable to hook to the DSL modem and then the phone cord ant electricity and yes both computers can be on line
2006-08-23 00:02:07 · answer #2 · answered by Paul G 5 · 0⤊ 0⤋
A crossover cable's the cheapest way, if you have ethernet connections at both sides. Everything should be automated once you've plugged in, but if you need further help, there're a lot of guides out there on connecting two computers that way. Good luck.
2006-08-22 23:50:32 · answer #3 · answered by Daniel 1 · 0⤊ 0⤋
Well, you could try superglue or a piece of wood and some nails but if you want to Network them, you can use a use a ethernet cable to connect the two and then run the "Network Wizard" to setup a new connection.
2006-08-22 23:43:56 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Connect two computers with cross lan cable
2006-08-23 00:44:29 · answer #5 · answered by Arvind g 1 · 0⤊ 0⤋
If the computer have network cards use a crossover cable or
2.usb to usb connection or
3.infrared connection
4.bluetooth
2006-08-22 23:51:35 · answer #6 · answered by Stan 3 · 0⤊ 0⤋
get a cross cable and connect them back to back
but if you want internet access you will have to buy a hub or switch and connect both the computers and the internet cable to three ports of the hub or switch
2006-08-23 00:34:36 · answer #7 · answered by bobgali 2 · 0⤊ 0⤋
Connect them with a lan cable
2006-08-22 23:42:48 · answer #8 · answered by spice 5 · 0⤊ 0⤋
through router or switch.
switch is better then router. it is very easy.
connect both computer through network cable. then connect them to switch. give each computer has own ip address fill in the network dns,gateway. restart
all over
2006-08-22 23:44:46 · answer #9 · answered by Anonymous · 0⤊ 0⤋
placed them in the same Workgroup and unique the archives you % to proportion making use of sharing and permissions. enable different desktops to connect on your connection, via properties on the on the spot interface. Use community discovery in community and connection and the different pc might desire to look. This often takes a on the same time as to establish top yet is great as quickly because it somewhat is. be careful its a great secure practices concern, ascertain you have WPA on the community and mark the shared folders as no longer executable permissions. might desire to be advantageous then.
2016-10-02 10:45:01 · answer #10 · answered by ? 4 · 0⤊ 0⤋
1- buy two network cards
2- buy utpwire
2- complete define network configurations
2006-08-22 23:43:45 · answer #11 · answered by MiniMe 1 · 0⤊ 0⤋