The dent can't be hammered out, because there is metal in the way. I tried a plunger, but it didn't work. The dent is to the right of the drivers side passenger door. It is to the right of the wheel-well. I would like a way to get it out using stuff you can find around your house. I also do NOT want to drill. Also, does anyone know what the Dent Doctor would charge to take out a lare dent? I do not want to pay more than $100 right now.
2006-08-22 07:59:44 · 6 answers · asked by secretbirdyj 3 in Cars & Transportation ➔ Maintenance & Repairs
Pull your trunk liner back and pop the dent out from inside the trunk. It may not be perfect, but it will look much better. Otherwise you can go to "Dent Doctor" or someone else who will weld a pin into the middle of then dent and pull it out that way. Then you have to repaint the area.
2006-08-22 08:09:59 · answer #1 · answered by soaplakegirl 6 · 0⤊ 0⤋
If you know of someone who works with plate glass, they usually have some pretty strong suction cups that they use to carry large peices of glass. If you could borrow one of those, that may be the ticket. I think you can buy one for about $20.
2006-08-22 08:07:15 · answer #2 · answered by Anonymous · 0⤊ 0⤋
ToddG is right,you have a undesirable gasoline tension regulator . the regulator controls the quantity of gasoline tension that flows to the gasoline injectors,offering delicate operation. Take the automobile to a good automobile restoration shop for service. good success !!!!!!!
2016-12-17 15:24:11 · answer #3 · answered by ? 4 · 0⤊ 0⤋
THAT IS A BAD SPOT. YOU WILL HAVE TO GO TO THE BODY SHOP TO THAT FIX. THAT IS PART OF THE QUARTER PANEL.
2006-08-22 08:24:51 · answer #4 · answered by STEVE D 1 · 0⤊ 0⤋
use dent puller
2006-08-22 08:13:56 · answer #5 · answered by carguy30021 3 · 0⤊ 0⤋
use a plunger!!!!!!!!!!!!!!!!!!!!!!!!if that don't work drill a hole in the center of it and use a slide hammer
2006-08-22 08:06:30 · answer #6 · answered by Robert 2 · 0⤊ 0⤋