When the turn signal is engaged, the bulbs do not flash but remain lit... I checked all of the bulbs and they are all working fine. The emergency flashers still flash. I am clueless please help.
2006-08-22 07:38:34 · 14 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
you have two flashers one for turn signal one for emergency flashers call ford auto to find where they put them for you can check the other one
2006-08-22 07:50:11 · answer #1 · answered by Anonymous · 1⤊ 0⤋
There is a bad bulb somewhere, check side markers also. Put signal on walk around car check bulbs, both directions!! If all are on it's the flasher!! Simple as that. Good Luck!! ?:)z
2006-08-22 15:06:17 · answer #2 · answered by PaPa Norm 6 · 0⤊ 1⤋
Replace the turn signal flasher. It is short, round, metal fuse basically. It is bare metal so looks silver. It will be under the dash or in the fuse box under the hood. It is about and 1.5 inches tall and about the same across. It just plugs in. You can get one at any parts store pretty cheap.
2006-08-22 14:47:54 · answer #3 · answered by jeepster420 3 · 2⤊ 1⤋
Try changing the fuses. If the bulbs work but don't flash, you may have a bad fuse. I have had the same problem in the past with different vegicles.
2006-08-22 14:45:19 · answer #4 · answered by angie 5 · 0⤊ 1⤋
you need a flasher unit. They are dirt cheap. The signals have there own. The 4 way (emergency)flashers run off there own.
2006-08-22 18:11:12 · answer #5 · answered by rldbr 2 · 0⤊ 1⤋
You probably need new bulbs. I know my Ford cars would always do that when they are "almost" burnt but not completely out yet. Change the bulbs, and if it still happens, then it could be a short somewhere.
2006-08-22 14:46:29 · answer #6 · answered by Ms Pepsi 3 · 0⤊ 1⤋
I believe there is a large fuse that serves as the blinker relay. It probably needs to be replaced. Check your owner's manual. It should be a silver round or square fuse and it won't look anything like a color-coded one.
2006-08-22 14:45:19 · answer #7 · answered by Stumpy 4 · 0⤊ 1⤋
Check al the bulbs and then check the wiring to the bulds may be loose
2006-08-22 14:45:32 · answer #8 · answered by aaricka 4 · 0⤊ 1⤋
Sounds like the relay that does the blinking has gone bad. Just need to replace it.
2006-08-22 14:45:16 · answer #9 · answered by callmecam2 3 · 0⤊ 1⤋
check the bulbs again,they have to parts.a running light and a blinker,if one filiment is bad thats what they usually do,or they will blink real fast...
2006-08-22 14:49:50 · answer #10 · answered by Anonymous · 0⤊ 1⤋