where are the oxygen sensors located on a 1996 Acura 2.5 TL?

Answer 1

follow the exhaust system , you should have at least one after the cat , and if its a 6 banger one on each side of the engine in the exhaust system , sometimes v6 only have 1 before the cat and 1 after the cat , why are u replacing them ????

Answer 2

Acura Tl Oxygen Sensor

Answer 3

Oxygen sensors are generally located on the exhaust manifold and in the exhaust pipe. There will be 2 to 3 of them depending on the manufacturer. Just look for the manifold and follow it you should run right into it.

Answer 4

it will have one right below the manifold,,and one just before the converter on it,,be care full these sometimes break off when you trying to remove them,,i own a repair shop in Tennessee,,and we do these all the time,,and i have had one or two break off,,if you,ll get the engine a little warm it will help,,on removal,,and be care full when installing the new ones,they can be damaged real easy if aren't care full,,i hope this help,s.

Answer 5

On the exhaust system near the catalytic converter.

Answer 6

there should be one in the minifold or header watever it has and there should be one in the downpipe that comes from the manifold or header, but yea check the catalytic converter becuz they sometimes have em as well

Answer 7

About a foot off of the headers

Answer 8

they will be located on the exaust system from the manifold to right before the muffler

Answer 9

exhaust manifold, one in the cat converter

Answer 10

under the hood