I croosed some wires on my Mazda 6 and now my overhead entry lights and power door locks will not work. I checked fuses and they are okay. What else can I do?
2006-08-20 10:56:32 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
you need to back track what you did to it to see if there are any wires crossed or out of place,,the fuse for the door locks i think is the same one that works the entry light,,you might want to look at all of them,if everything was working before,,it has to be something simple.just take your time,,and you,ll find it,,i hope this help,s.
2006-08-20 11:08:13 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
get a wiring diagram they sometimes use in line areas that melt and open the wire. you will have to get a volt ohm tester and a diagram. also check to see if your back lights work.
2006-08-20 18:09:34 · answer #2 · answered by zocko 5 · 0⤊ 0⤋
Just take it to an electical shop it can get costly ruling out things they have all the tools necessary to get right to it.
2006-08-20 18:13:41 · answer #3 · answered by Anonymous · 0⤊ 0⤋
+you need a wire tester to check you contanuity
2006-08-20 18:03:18 · answer #4 · answered by BICCA 3 · 0⤊ 0⤋