wrong. If I unplug it and let it set for a couple of days will it work correctly again?
2006-08-20 03:36:12 · 7 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
You should have let it sit upright for 24-48 hours after it was tipped or on its side. Any gunk that may be in the compressor oil could have travelled to the refrigerant lines and that could possibly create a blockage in the line or lines. Unplug it and let it sit for a while to allow any oil that may have migrated to drain back into the compressor. Then run it as normal. Hopefully nothing got to a line to plug it up.
2006-08-21 11:05:18 · answer #1 · answered by jollygreen60 3 · 0⤊ 1⤋
It should work again if you unplug it and leave it upright for at least 24 hours.
2006-08-20 10:41:52 · answer #2 · answered by physandchemteach 7 · 0⤊ 1⤋
Mabye. But it should have sat for 24 hrs upright before turing it on.
It may be OK its hard to tell
Hope it works!!
2006-08-20 10:42:37 · answer #3 · answered by deann 2 · 0⤊ 1⤋
I work with appliances every day, just let it run , It should be O K.
2006-08-20 12:07:36 · answer #4 · answered by big jack 5 · 0⤊ 1⤋
well I'm not electrician but i think that you should call service or visit website about refrigerators.
2006-08-20 10:43:25 · answer #5 · answered by tanjam5ji 1 · 0⤊ 1⤋
you have nothing to loose. one day should be enough.
2006-08-20 10:55:29 · answer #6 · answered by zocko 5 · 0⤊ 1⤋
i may be wrong but i don't think it will
2006-08-20 10:42:18 · answer #7 · answered by Anonymous · 0⤊ 1⤋