2006-08-19 20:19:19 · 3 answers · asked by Anonymous in Home & Garden ➔ Do It Yourself (DIY)
The issue with cutting crown molding for the corners is getting it to make a proper joint. Because the corner is cut at two different angles, you will need to take a coping saw and cut out one of the piece at the plane where you cut it with a saw.
I found this website....one of many when I did a simple yahoo search.
http://www.invitinghome.com/Crown_Molding/Molding_List.htm
2006-08-20 07:38:22 · answer #1 · answered by richard Alvarado 4 · 0⤊ 0⤋
Any miter box will do. As far as one for under $50, I would suggest that this is either a non-electric hand pull miter box like they used to use for years or a very inexpensive power miter box.
2006-08-20 02:29:09 · answer #2 · answered by duke1414 3 · 0⤊ 0⤋
Was this tool mounted to a Jigsaw? If so you can find it at collinstool.com.
2006-08-22 02:21:41 · answer #3 · answered by Carpenter 3 · 0⤊ 0⤋