English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

13 answers

I had the exact same issue with my 6R. Because it's a smaller engine, the rpms climb higher faster than they do on the big boys. I suspect that warning is generic.....

Since there was no way in hell I was going to keep it under 3-4 rpms, I just rode it normally and didn't "get on it." You know what I mean....

2006-08-22 04:51:39 · answer #1 · answered by Anonymous · 0 0

Always give year, make, engine size and model # when asking questions. Ninjas, 600 and larger have a red line over 10,000. They can be reved to 6000 without any damage during break in. Just don't hold the revs in one place for to long. The proper way to break in a bike is to not open the throttle like your at a drag strip. Vary the rpm's so there's even wear on internal moving parts.
Wait....is 4 rpm a typo on your part? 4,000 rpm is a good # for ninja 250's & 500's.

2006-08-19 13:09:03 · answer #2 · answered by guardrailjim 7 · 0 0

I hit 40 at 4K RPM in second on my ninja what are you talking about. But yes do what the manual says the engine needs to properly heat cycle and break in.

2006-08-22 04:36:44 · answer #3 · answered by audiowheelie 2 · 0 0

Hi, I have a ninja and yes you have a breaking in period.This is so you don't get up to speeds that will damage your motor.Besides,500 miles will go by fast,and them you can see what power your ninja has.Boy, i was totally surprise at the power my ninja has.She can keep up with the best of them.Have fun and enjoy your new ninja.

Clowmy

2006-08-19 10:45:06 · answer #4 · answered by Anonymous · 2 0

You absolutely must give the engine time to break in. In fact, you'll probably need to get an oil change at the end of the break-in period, because your engine will wear off lots of tiny metal bits into the oil during break-in (which is precisely what is supposed to happen).

Deal with it now, or you'll bike will never have the power it should.

2006-08-20 07:22:54 · answer #5 · answered by Steve 6 · 0 0

no, no, no !! examine the handbook back it says "do no longer exceed over 4000rpms for an prolonged quantity of time" what which ability is you may bypass over 4000, do exactly no longer carry it there and experience it for 10 miles non-supply up at over 4000 rpms its okay to bounce on it and exceed that decrease, yet for extremely short situations

2016-12-17 13:45:56 · answer #6 · answered by ? 4 · 0 0

The maker knows what he is talking about. Do you really want to deal with the engine troubles you will cause yourself, if you don't follow directions. And, by the way, they can always tell if you cheat because of the wear marks inside the engines.

2006-08-19 10:38:04 · answer #7 · answered by Anonymous · 1 0

be gentle for the first 500 miles then you are going to want to give it an oil change at that point the you should be fine to beat the hell out if it

2006-08-19 14:49:41 · answer #8 · answered by Anonymous · 0 0

yes take it easy hit 500 miles change the oil and that is a must and then have fun

2006-08-21 04:18:54 · answer #9 · answered by John L 2 · 0 0

Follow all manufacturers break-in instructions. You will be happier in the long run.

2006-08-19 12:11:59 · answer #10 · answered by Anonymous · 1 0

fedest.com, questions and answers