English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

sometimes when taking off the truck will stall and die if you dont let off the gas. but if you shut it off and start it back it will run fine. also when the engine warms up you loose overdrive and the motor will always shift around 3000 rpms but again if you cut it off then turn it back on it will run fine any suggestions

2006-08-18 14:45:12 · 4 answers · asked by dwayne40324 1 in Cars & Transportation Maintenance & Repairs

4 answers

you have got a bad ground somewhere for the computer,,i have seen one other truck do this,,i own a repair shop,,and i had a customers truck do this,,and we found a bad ground wire up in under the dash area,,right above the steering column,,and after repairing that,,it did OK,,this may not be what is wrong with your,,but it sure sounds lie it,,i hope this helps.

2006-08-18 14:53:43 · answer #1 · answered by dodge man 7 · 0 0

Sounds like an open temp sensor you will need to have a professional to read the live data and see. I would think the check engine, service engine soon light has been on for some time. Note turn on the key that SES light lights up bulb test then turns out when the engine starts. Haven't seen that light bulb or has it burnt out, been removed or altered.

2006-08-18 14:55:39 · answer #2 · answered by John Paul 7 · 0 0

basically as a results of fact the bike rolls would not meen the grab is worki ng right it ability that it extremely is enticing sufficient to unfastened the sprocket tention. that doesnt mea it extremely is enticing far sufficient to unfastened the gears for shifting. i'm ninety 9% optimistic that your grab plates are in products. and if it isnt that than the basket could be grooved so undesirable it extremely is inflicting problems. if that bike is a 2001 and has even have the hours of a bike have it age the grab could be replaced. relatively if that bike replaced into ever used as a pit bike or did and seriouse path working with it. and the oil could rather no longer have that plenty to do with it except the transmission oil is low. it seems such as you in elementary terms checked the motor oil. 2 diverse areas of the bike 2 diverse oils and motor oil has no function in shifting.

2016-12-17 13:22:52 · answer #3 · answered by Anonymous · 0 0

vaccume problem of some kind map senser but not sure

2006-08-18 14:53:20 · answer #4 · answered by big_t_1_1999 2 · 0 0

fedest.com, questions and answers