computer help needed, Windows protection error?

Question

I have a older laptop, which is windows 95. Every time i turn it on it starts up fine but right when it is about to login it goes to blank screen and says ''Windows protection error please restart your computer''. and of course the only thing i can do is push the power button. Then if i turn it on again it says improper shutdown detected then i am able to login in safe mode.
My Question is; is there anything i can do in safe mode to fix the problem, maybe somthing i can delete or some settings i can change that will fix the problem. If not, how can i restore the computer to factory settings, For that would most likely correct the problem. I very much appreciate any answers. thankyou for your time.

Answer 1

Wow you have an old laptop. I am so happy Microsoft has improved with their operating system (my luck i suppose, if anyone disagrees) since Windows 95. Windows 95 was infamous for always screwing up on people - especially me. Personally, I would just buy a newer computer or if you can't afford a brand new computer buy a newer used one. At least make it one with Windows XP or you could even scrap Windows 95 and install some sort of version of Linux OS on there.

But if you want to fix it I did find a Microsoft website you can go to help you out. And just as I figure before I researched this information it could be a myriad of things. Anywhere from the registry being damaged to a virus or something worse like issues with your hardware. Listed below is a website you can go to help you out. I hope this helps you out as you didn't go into greater detail about what the error message said. Then again maybe that's all Windows 95 gave you that you noticed. It wouldn't surprise me. If I was Microsoft I would've been embarrassed as that program had so many glitches and they never put a lot of effort into fixing all of them.

Answer 2

2

Answer 3

Try the following:

- Check the hard drive for any error (chkdsk /f)
- Empty the temp directory,
- Go into the control panel and de-activate all disk caches (this was the origin of 90% of Windows 95 problems)
- Try to delete the swap file

Sorry...I used to know exactly, but I don't remember everything.

You can find a boot disk at:
http://www.bootdisk.org

Good luck

Answer 4

This situation can take position if a plague hooked the INT21h or INT13h chain earlier Microsoft abode windows is loaded, an risky gadget motive force is detected, or a secure-mode motive force is lacking or damaged interior the Iosubsys document placed interior the WindowsSystemIosubsys folder. one million. Restart your computing device. For a Microsoft abode windows ninety 8-depending computing device, press and carry down the CTRL key after your computing device is finished the ability-on self attempt (publish), and then on the Startup menu, click Command prompt purely. 2. in case you acquire an analogous mistakes message once you attempt to restart your computing device in secure mode, flow to the subsequent step (Step 3). in case you could restart your computing device in secure mode, sparkling boot your computing device to locate the reason behind your situation. 3. Make a Bootlog.txt document and learn it to locate the reason behind the mistakes. Restart your computing device utilising the steps defined interior the former step one million or maybe as the Startup menu is displayed, click step-via-step confirmation.• Press Y and enter after each and every line is displayed: • Load DriveSpace motive force? • procedure the equipment registry? • Create a Startup Log document (Bootlog.txt)? • procedure your Startup gadget drivers (Config.sys)? • gadget=pathHimem.sys? • gadget=pathIfshlp.sys? • gadget=pathDblbuff.sys? • gadget=pathSetver.exe? • procedure your Startup command document (Autoexec.bat)? • Load the abode windows graphical consumer interface? • Load all abode windows drivers? 4. Restart your computing device utilising the former step one million, and then on the Startup menu, click Command prompt purely. 5. Use the command prompt to view the C:Bootlog.txt document to locate the project. on the command prompt, type: edit bootlog.txt Press enter, and then learn the Bootlog.txt document for "Initcomplete=" entries. those entries might want to provide clues as to the reason behind the project. each and every "Initcomplete=" get admission to must have an similar "Initcompletesuccess=" get admission to on a effective initiate of your equipment. If the perfect line interior the Bootlog.txt document reflects an "InitFailure" or "LoadFailure" message for a motive force, write down the motive force's call, go out the Bootlog.txt document, press ALT+F, press X, click ok, and then seek for for the motive force.

Answer 5

Why I kept this I will never know. But here you are. Go to your C; program in the dos.
C>prompt $p$g
C:\>PathC:\;C:\windows;c:\dos,
C:\>set Temp=C:\wimdows\Temp
C:\cd\dos
C:\DOS>doshell
This should get window started when you turn your computer on. Hope it helps. good luck. I have another book on win95, If you need more help let me know and I will try and find it.

Answer 6

Sounds like you will need to format the hard drive.