when was the television remote control invinted?

Answer 1

http://en.wikipedia.org/wiki/Remote_control
One of the earliest examples of remote control was developed in 1893 by Nikola Tesla, and described in his patent, U.S. Patent 613809, named Method of and Apparatus for Controlling Mechanism of Moving Vehicle or Vehicles. The first remote-controlled model aeroplane flew in 1932. The use of remote control technology for military purposes was worked intensively during the Second World War, one result of this was the German Wasserfall missile. The first remote intended to control a television was developed by Zenith Radio Corporation in the early 1950s. The remote — unofficially called "Lazy Bones" — used a wire to connect to the television set. To improve the cumbersome setup, a wireless remote control was created in 1955. The remote called "Flashmatic" worked by shining a beam of light onto a photoelectric cell. Unfortunately, the cells did not distinguish between light from the remote and light from other sources. The Flashmatic also required that the remote control be pointed accurately at the receiver.

In 1956 Robert Adler developed "Zenith Space Command", a wireless remote. It was mechanical and used ultrasound to change the channel and volume. When the user pushed a button on the remote control it clicked and struck a bar, hence the term "clicker". Each bar emitted a different frequency and circuits in the television detected this noise. The invention of the transistor made possible cheaper electronic remotes that contained a piezoelectric crystal that was fed by an oscillating electric current at a frequency near or above the upper threshold of human hearing, though still audible to dogs. The receiver contained a microphone attached to a circuit that was tuned to the same frequency. Some problems with this method were that the receiver could be triggered accidentally by naturally occurring noises, and some people, especially young women, could hear the piercing ultrasonic signals. There was even a noted incident in which a toy xylophone changed the channels on these types of TVs since some of the overtones from the xylophone matched the remote's ultrasonic frequency.

The impetus for a more complex type of television remote control came in the late 1970s with the development of the Ceefax teletext service by the BBC. Most commercial remote controls at that time had a limited number of functions, sometimes only four: next station, previous station, increase or decrease volume. This type of control did not meet the needs of teletext sets where pages were identified with three-digit numbers. A remote control to select teletext pages would need buttons for each number from zero to nine, as well as other control functions, such as switching from text to picture, and the normal television controls of volume, station, brightness, colour intensity and so on. Early teletext sets used wired remote controls to select pages but the continuous use of the remote control required for teletext quickly indicated the need for a wireless device. So BBC engineers began talks with one or two television manufacturers which led to early prototypes in around 1977-78 that could control a much larger number of functions. ITT was one of the companies and later gave its name to the ITT protocol of infrared communication. [1]

In the early 1980s, when semiconductors for emitting and receiving infrared radiation were developed, remote controls gradually switched to that technology which, as of 2006, is still widely used. Remotes using radio technologies, such as Bose Audio Systems and those based on Bluetooth also exist.

By the early 2000s, the number of consumer electronic devices in most homes greatly increased. According to the Consumer Electronics Association, an average American home has four remotes. To operate a home theater as many as five or six remotes may be required, including one for cable or satellite receiver, VCR or digital video recorder, DVD player, TV and audio amplifier. Several of these remotes may need to be used sequentially, but, as there are no accepted interface guidelines, the process is increasingly cumbersome. Many specialists, including Jakob Nielsen [2], a renowned usability specialist and Robert Adler, the inventor of the modern remote, note how confusing, unwieldy and frustrating the multiplying remotes have become. To that end, designers of the TiVo remote control replaced the standard columns of buttons on a black rectangle with a distinctive peanut-shaped design that has been well received by its users. This design, which has spawned several imitations, is likely to change the way consumer electronics designers approach the remote.

Answer 2

The first remote intended to control a television was developed by Zenith Radio Corporation in the early 1950s. The remote — unofficially called "Lazy Bones" — used a wire to connect to the television set. To improve the cumbersome setup, a wireless remote control was created in 1955. The remote called "Flashmatic" worked by shining a beam of light onto a photoelectric cell. Unfortunately, the cells did not distinguish between light from the remote and light from other sources. The Flashmatic also required that the remote control be pointed accurately at the receiver.

The Zenith Space Command remote controlIn 1956 Robert Adler developed "Zenith Space Command", a wireless remote. It was mechanical and used ultrasound to change the channel and volume. When the user pushed a button on the remote control it clicked and struck a bar, hence the term "clicker". Each bar emitted a different frequency and circuits in the television detected this noise. The invention of the transistor made possible cheaper electronic remotes that contained a piezoelectric crystal that was fed by an oscillating electric current at a frequency near or above the upper threshold of human hearing, though still audible to dogs. The receiver contained a microphone attached to a circuit that was tuned to the same frequency. Some problems with this method were that the receiver could be triggered accidentally by naturally occurring noises, and some people, especially young women, could hear the piercing ultrasonic signals. There was even a noted incident in which a toy xylophone changed the channels on these types of TVs since some of the overtones from the xylophone matched the remote's ultrasonic frequency.

Answer 3

The first TV remote control device was invented in 1950 by Zenith Corporation. It was called "The Lazy Bones".

Answer 4

We have been the distant administration We had to attend 5 minutes for the set to heat up We had in basic terms 5 Stations, NBC, ABC, PBS, CBS, and an self sufficient Station. We had Rabbit Years or an exterior Antenna which might must be grew to become to p.c.. up a sparkling sign. the section I grew up we've been waiting to p.c.. up Stations in Chattanooga, Knoxville, and Nashville with our outside Rotary Antenna. I submit to in techniques whilst shade instruments 1st got here on industry. you could watch previous Episodes of right here shows and you will see whilst they moved from Black and White to shade The Beverly Hillbillies The Andy Griffith teach Bewitched I Dream of Jeanie

Answer 5

When John Logie Baird had eaten so many deep fried mars bars he couldn't get out of his armchair.

Answer 6

Something tells me that it was invented by a man! See the website below.

Answer 7

Back in the 50's. It was ultrasonic.