I bought my 125cc bike around 3mths ago and today i went out but it started raining heavily i got to my destination through the rain and was gone about 30mins i got back to my bike started it up but when i tried to pull away it cut out,the bike still starts up but when i try to rev the throttle it just cuts out again anyone got any ideas.
2006-08-17 07:56:49 · 8 answers · asked by CHAMPIONS CHELSEA 06/07 1 in Cars & Transportation ➔ Motorcycles
Sounds like wet ing. and or water in carb.1) pull spark plug(s),turn enjine several times. replace cleaned and dried plugs.start engine.2)if still running sh......ty water got into the carb.
Remove airfilter and dry out the area you can see on and in the card(also the air filter) start engine let run untill warm.Replace filter. One last trick isto let bike sit afew hours and they usually dry out themself. Good luck and happy riding
2006-08-17 14:42:00 · answer #1 · answered by R W 6 · 0⤊ 0⤋
thankfully I also have a Suzuki 125cc airborne dirt and dirt motorbike and as quickly as apon time I even have had that individual same subject after leaving my airborne dirt and dirt motorbike up for extra advantageous than a month that i comprehend of. the difficulty is relatively what all and sundry else is announcing....the flow valve needle is caught and desires to be wiped sparkling/ fastened if a threat.
2016-10-02 05:09:37 · answer #2 · answered by chauarria 3 · 0⤊ 0⤋
Hard to say, but moisture in the electronics/ignition can never be good. Try taking off the air cleaner, see if the air filter got filled with junk/water etc. Engines hate water.
2006-08-17 08:24:28 · answer #3 · answered by gokart121 6 · 0⤊ 0⤋
Are you trying to pull away with the kickstand down? Some bikes will kill the ignition if you try to drive off with the stand down.
2006-08-17 08:45:52 · answer #4 · answered by x 5 · 0⤊ 0⤋
think for a second... it was raining and the bike started running baddly... hmhmmmmmm. rain? water?? Rain, water, gas...... flush out the tank and carb.....
2006-08-17 08:18:21 · answer #5 · answered by Anonymous · 0⤊ 0⤋
check your jets if they are loose flush your tank and carb, you probably just got h2o in the gas
2006-08-18 15:51:53 · answer #6 · answered by jay rod 2 · 0⤊ 0⤋
premature injectorlation.
Adjust your carbs, and run some stuff through to evaporate the water.
2006-08-17 08:03:49 · answer #7 · answered by Honesty is the best policy 2 · 0⤊ 0⤋
most likely it your wet plug wire. dry it.
2006-08-17 08:30:31 · answer #8 · answered by Anonymous · 0⤊ 0⤋