2006-08-17 07:53:37 · 5 answers · asked by Joe D 1 in Home & Garden ➔ Do It Yourself (DIY)
The shower head I installed had a disc inside of it you simply removed.
2006-08-17 08:03:00 · answer #1 · answered by Wurm™ 6 · 1⤊ 0⤋
unscrew the shower head remove the water saver which is behind the head
2006-08-17 15:02:10 · answer #2 · answered by aussie 6 · 0⤊ 0⤋
We did this once and the water pressure was way too much! So, we took out the little plastic piece that people are mentioning here and snapped part of it off, and bingo, we got the pressure we wanted but still "saved" some water, I guess...
2006-08-17 15:43:37 · answer #3 · answered by Kim S 2 · 1⤊ 0⤋
unscrew shower head look for a round washer in the neck. if you can pull out that washer, your good. if not, go buy a cheap plastic one that doesn't say water saver.
2006-08-17 16:15:38 · answer #4 · answered by zocko 5 · 0⤊ 0⤋
drill bit that is slightly bigger. Unscrew the head and you will see how small the hole is. Just drill it out to the size you want. Boom you have a river comming out of the wall. Assuming you have good pressure.
2006-08-17 15:00:17 · answer #5 · answered by Karrien Sim Peters 5 · 0⤊ 1⤋