There are two things you can try.
1) Reboot the computer.
2) Clean your mouse.
--- On the bottom of the mouse, there is a round cover.
--- Open by twisting it counterclockwise.
--- Remove the ball, (about the size of a large marble).
--- Looking inside, you will see two rollers.
--- Most likely, they are full of lint and dirt.
--- Clean with a q-tip and rubbing alcohol.
--- Reassemble.
If this fails, then purchase a new mouse, which should cost less than $12.
Good luck.
2006-08-17 07:44:06
·
answer #1
·
answered by Mitch 7
·
1⤊
0⤋
Unplug the mouse.
On the back of the mouse is a circular disk.
Turn in the direction of the arrows. When it is loose, you see the rubber ball.
Clean the ball with alcohol. Use a q-tip with alcohol and swab the inside, carefully.
You will see the gunk.
Let dry, and replace the ball and disk.
2006-08-17 14:41:33
·
answer #2
·
answered by ed 7
·
0⤊
0⤋
Do your own work and not have the mouse do it all. He went on strike.
2006-08-17 14:39:44
·
answer #3
·
answered by vinible2006 4
·
0⤊
0⤋
go behind the tower a.k.a. big box thing that you put CDs in (I only put that in because most people in my area dont know what I mean when I say "the tower") follow the mouse cable. plug it in as far as it goes. hope it works
2006-08-17 14:40:51
·
answer #4
·
answered by Gremple 2
·
0⤊
0⤋
Buy a new mouse and get a cordless one.
2006-08-17 14:38:50
·
answer #5
·
answered by Waltjh 2
·
0⤊
0⤋
unplug it plug it back in reboot computer or trap a new mouse.
2006-08-17 14:37:36
·
answer #6
·
answered by c0mplicated_s0ul 5
·
1⤊
0⤋
is that a usb or ps2 mouse you can try unplugging and pluggin it back in and restart the pc or make sure in your device manager it is installed.
2006-08-17 14:38:32
·
answer #7
·
answered by malung786 4
·
0⤊
0⤋
Buy a new one baby
Which mouse work at all???????????????
2006-08-17 14:38:37
·
answer #8
·
answered by Konfuzius 3
·
0⤊
0⤋
ok check to see if it plugged in and remove the ball if its old style to remove dust. if all else fails buy a new one
2006-08-17 14:38:58
·
answer #9
·
answered by jim 3
·
0⤊
0⤋
Check with the compuer cat.
2006-08-17 14:38:41
·
answer #10
·
answered by bretto24 3
·
0⤊
0⤋