HOW CAN YOU MAKE PLASMA AT HOME!!!!!!!!!
mate, plasma is a state of matter neither solid, nor liquid or gas.
it is the fourth state of matter. plasma is that state of a substance where its components are completely ionised and have an extremely high KINETIC energy. all these ions are in continuous, very, very swift motion. the energy is so high that the repulsion between nuclei(containing protons + neutrons) is overcome such that fusion becomes possible.
this process requires nearly 6 million kelvin temperature AND IS IMPOSSIBLE to be directly generated. these temperatures are attained by exploding atom bombs which produce devastatingly high temperatures, such that plasma is formed.
if you are born a genius, invent a container which can withstand such high temperatures. then its your way further. add hydrogen or any fusion raw material and somehow get the required temp.!!!!!!! AND NOW YOU HAVE GOT A PLASMA, and a NOBEL PRIZE TOO(for inventing the container). CONGRATS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
REMEMBER MY FRIEND, THE DAY WHEN U GET THE NOBEL PRIZE WILL BE THE DAY U WILL REVOLUSIONIZE NUCLEAR PHYSICS BY PREPARING PLASMA AT HOME!!!
and this poor friend of yours will be wandering everywhere searching you for a return gift for my golden advise.
MAYBE LATER IN YOUR RESEARCH LIFE, YOU'D FORGET ME. THAT'S WHY GIFT ME 10pts. FOR MY ANSWER JUST NOW...........
i'm waiting.......................................................................................
2006-08-17 01:18:52
·
answer #1
·
answered by Anonymous
·
1⤊
0⤋
Depends on how much you want and what you want to do with it.
If you want just "see" a plasma (its ill-advised to try this with the naked eye), go down to the welding shop and get a "Plasma arc torch"
A plasma is a gas that has been ionized by the electric arc of a plasma torch and can therefore respond to electrical and magnetic fields.
Plasma arc technology can create plasma using almost any type of gas (oxygen, nitrogen, carbon monoxide, air, etc.) and in a wide range of pressures (vacuum to 20 atmospheres). The flame of the plasma torch is actually an energized arc, similar to lighting.
The plasma arc has a wide spectrum of temperatures ranging from 1500°C to over 7000°C, or approximately 1000°C hotter than the surface of the sun. The plasma arc torch uses copper electrodes to create a non-transferred arc. The plasma torch and electrodes are water-cooled and the average life of the electrodes ranges between 200 to 500 hours of operation. A DC power supply unit provides the electrical requirements of the torch and commercial units are available in power levels ranging from about 100 kW to 10 MW capacity.
2006-08-17 02:37:04
·
answer #2
·
answered by ChemDoc 3
·
0⤊
0⤋
If you can have a radiofrequency source and some inert gases, like Helium (He), Argon (Ar) etc then only you can make plasma. Or else if you can produce 10^7 Kelvin temperature then any gas can be in the plasma state around there like in the sun atmosphere.
2006-08-17 00:24:27
·
answer #3
·
answered by dinu 3
·
2⤊
0⤋
Go buy a fluorescent light bulb, plug it in, and what you're looking at is plasma that is usually made up of mercury ions that have been excited by the high voltage inside of the bulb.
2006-08-17 06:53:50
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
None of those solutions is authentic, whether "weary" comes closest. first of all, you have already got a DVD/CD/Blu-ray participant so i'm unsure why you got a house theater in a container (HTIB) device it extremely is according to yet yet another DVD participant. HTIBs according to receivers grant you greater enlargement and connection recommendations. There are 3 techniques of "sending" audio out of a PS3, yet to realize this which you may first connect it to the domicile theater device. a million.) HDMI cable - despite the fact that, utilising HDMI demands a receiver that methods audio over HDMI. lots of the greater value-effective HTIB structures do no longer, so i will assume it extremely is the case here. 2.) RCA cables - those are the purple and white tipped cables that comprise the PS3. you do no longer desire to apply those as a results of fact they'll in elementary terms deliver 2 channel (stereo) sound. you desire embody sound, so which you ought to apply... 3.) Optical cable - this could "deliver" embody sound (i.e. 5.a million) on your receiver. connect them with an optical cable and then regulate your audio output settings interior the PS3 menu to "optical" and "bitstream". ultimately, replace the enter on the HTIB properly and you would be in employer. If that HTIB would not have an HDMI or optical cable decision, which it feels like it would not, then return it for a device that does.
2016-12-17 12:21:52
·
answer #5
·
answered by ? 4
·
0⤊
0⤋
well you can cut open your arm and separate the red blood cells from the plasma by spinning it really really fast
2006-08-17 06:43:33
·
answer #6
·
answered by shiara_blade 6
·
0⤊
0⤋
byu a sony's 72" plasma screen and place it in ur ome.. here uve made a plasma in ur hme....
2006-08-17 00:22:55
·
answer #7
·
answered by RiCKeY.... 2
·
0⤊
0⤋
Learn high tec television technology and electronics. You surly can make one at home.
2006-08-17 03:03:19
·
answer #8
·
answered by ravi k 2
·
0⤊
0⤋
You will have to have a lab in your home OR make a mini sun
2006-08-17 01:57:58
·
answer #9
·
answered by tej 2
·
0⤊
0⤋
It's not possible.
2006-08-17 00:23:13
·
answer #10
·
answered by star123 2
·
0⤊
0⤋