Why does most clocks and watches in ads show time 10:10?

Answer 1

1. Best display set up to showcase all arms, numerals, letterings and other potential text on the face/dial pad.
2. Distinctly shows the short arm and the long arm for hour and minutes as well as the seconds arm (if any) which would be at the 30
3. Gives maximum space for logo & other text to be displayed
4. Sometimes, the top half of the round face of a watch typically also contains either a date or some kind of an alarm display, and this also can be presented as a sales/marketing feature prominently in an advertisement or display showcase.
5. This 10:10 is usually only on non-digital display units i.e. ones without the arms...the digital display of 10:10 is just a carry on or a fall off of the traditional or age old advertising/marketing practice for watches with arms....just vintage stuff and for lack of creativity...or in another perspective...could be percieved as very creative digitally...you would actually see 10:10: 10 i.e. 10 hrs, 10 minutes and 10 seconds and so on to display the accuracy to which the watch can function.

Answer 2

Watch Ads 10 10

Answer 3

FAQ: Why are Clock Hands Pictured at 10:10?
Question
Why do clocks and watches in advertisements and illustrations often have their hands set at 10 minutes after 10?

Aesthetics
I personally think that the 10:10 position (sometimes 10:12 or 10:08) was adopted for pictures of clocks and watches because it is symmetric and looks better. Today the symmetric positions are both aesthetic and customary. Other symmetric hand positions are also used, but not as frequently. Examples include 8:20, 8:18, and 2:50. Reviewing some Seth Thomas clock catalog illustrations, I see a gradually increasing symmetry of the hands as the catalogs progress from 1878 to 1940.

"We always put hands to 10.10 here and in other collections I'm responsible for. The answer is probably quite simply that it looks better, aesthetically and practically, as the clock has a 'smile' on its face (not just a marketing gimmick, it really does look better than a 'down turned mouth' at 8.20) and, as others have said, because it keeps the hands clear of signatures and other subsidiary dials. I note that not every firm uses that position in their marketing though. Synchronome, for example, appear to depict their dials at 3.00." - Jonathan Betts

"The opinions I've read tend toward 'framing' the maker's name on the clock face. Viz: when the logo is placed above the center, the hands are at 10:10 but when the logo is below the center, the hands are shown at 8:20 framing the maker's name. Wristwatch advertising follows this trend." - Les Lesovsky

"Thomas A. Frank wrote: '...most manufacturers trademarks are just above the center pipe, and having the hands at 10:10 causes your eye to naturally follow to the trough, thus bringing your view right to the trademark....' and often the Model name is centered under the center pipe, ruling out any hand more or less straight down (between 5 and 7). Date windows most often are at 9 or 3, and subsidiary seconds usually at 6. For aesthetic reasons you want the two hands neither nearly covering each other nor nearly in a straight line. By default the 10h10 looks pretty good." - Fortunat Mueller-Maerki

"Smile" Theory
It has been suggested that the 10:10 position is used because it resembles a smile.

"I too have heard the 'smile' theory, which makes some sense from the emotional marketing perspective. Equally likely is the fact that most manufacturer's trademarks are just above the center pipe, and having the hands at 10:10 causes your eye to naturally follow to the trough, thus bringing your view right to the trademark." - Tom Frank

Time of Abraham Lincoln's Death
U.S. President Abraham Lincoln died at 7:22 a.m. on April 15, 1865, although he was shot at 10:15 p.m. on April 14, 1865. Although this has been suggested, I doubt that the position of the hands commemorates the time of Lincoln's assassination or death

Source(s):
http://www.ubr.com/clocks/faq/1010.html...

Answer 4

Because 10:10 is deeply programmed into your pyshe' as the time to buy a watch!

Answer 5

for some years after the yankee Civil conflict, clocks have been set at 7:22 to keep in mind the time of President Lincolns loss of life. considering that this led to the hands to be pointed downward, it replaced into seen a tragic time. It replaced into no longer until eventually after WW2 that some advertiser have been given the assumption to coach the hands upward as a great fact to mirror the allied victory. V for victory.

Answer 6

10 -10 or 08-20 positionsof analogue watch hands display most effectively the brand ,logo etc. on the dial.

Answer 7

It's supposed to be a pleasing arrangement of the hands - supposed to look like a smile. Also, it avoids most features which are usually in the bottom half of the watch

Answer 8

actually it's not 10:10.. it is 10:09:36.
at this pertiular time US deployed the atom bomb on Japan. so this perticular time is used to remind of the US dominence.

Answer 9

Allows the manufacturer to display their logo prominently.

Answer 10

try following web page