change out in order to make that swap? Please be detailed. Thanks in Advance.
2006-08-15 11:19:38 · 5 answers · asked by EMG 1 in Cars & Transportation ➔ Maintenance & Repairs
You need to do lots of research. Check out either High Performance Pontiac (Firebird is almost the same), Hot Rod, Car Craft, etc. for similar swaps. At the very least (off the top of my head):
Bigger radiator
Rear axle ratio
Beefier transmission (?)
front springs
2006-08-15 11:25:26 · answer #1 · answered by InjunRAIV 6 · 1⤊ 0⤋
Is alot to put into details here. Will need motor of course, engine harness, and computer. Upgrade the drivetrain maybe. Also motor mounts, and also some other sensors that the V-6 don't have. Headers, and other exhaust. And possibly flexible fuel lines, cause the V-6's location of fuel delivery maybe different too. Hope thats a start.
2006-08-15 18:26:27 · answer #2 · answered by Silverstang 7 · 0⤊ 0⤋
It would be easier to buy a camaro with a v8 in it all ready. the suspension/ brakes/ transmission/and electrical are all different.
2006-08-15 18:47:34 · answer #3 · answered by ssshoebox67 3 · 0⤊ 0⤋
OK sorry to say you can't do it.
You are getting into to many modifications to make it fit. Most of the parts engine, trans and suspension will not change.
You will have to change body mounts, transmission mounts and engine mounts.
2006-08-15 18:28:12 · answer #4 · answered by goldwing127959 6 · 1⤊ 0⤋
Dont do it - sell it and buy a Z28 - you can get a used on very cheap!
2006-08-15 18:28:42 · answer #5 · answered by Anonymous · 1⤊ 0⤋