Does it cold or hot sometimes not for a wial and othertimes often we are going to try the computer next ,driving me crazy.
2006-08-15 10:54:26 · 5 answers · asked by catman 1 in Cars & Transportation ➔ Maintenance & Repairs
Could be the ignition module. Was a common probelm on them years of GM cars.
2006-08-15 10:59:23 · answer #1 · answered by Silverstang 7 · 2⤊ 0⤋
Assuming that there are no diagnostic trouble codes stored in the pcm,my first check would be the battery cable connections.If power source is ok and the engine is stalling due to lack of ignition spark--check out the ignition system wiring harness(the engine subharness that connects to the cam and crank sensors and the ignition module)it is routed behind all the components mounted on the front of the engine and oil leaks will eat the things for lunch!Especially on an eleven year old vehicle.while the engine is running/idling just give a gentle tug/wiggle on the harness in a few places.If the vehicle stalls while maneuvering the wiring harness,inspect it really close for shorting out.Those harnesses can be repaired relatively easily once removed from the front of the engine.hope this info helps and good luck!--------P.S....................be extemely careful around those moving engine parts!
2006-08-15 20:53:34 · answer #2 · answered by harperboy1 2 · 0⤊ 1⤋
Yes, definitely sounds like the ignition module. It's located under the coils. Flat square module with 2 plugins and the coils plug in on top of it. Good luck.
2006-08-15 18:46:37 · answer #3 · answered by jeff s 5 · 1⤊ 0⤋
Timing belt. Or iginition module. I'd check the module first.
2006-08-15 18:27:13 · answer #4 · answered by Ironball 7 · 0⤊ 1⤋
COULD BE YOU HAVE MORE MONEY THAN BRAINS...IT GETS QUITE EXPENSIVE BUYING PARTS AND SWAPING THEM HOPING TO GET THE RIGHT PART. YOUR AUTO EDUCATION CAN COST ALOT THAT WAY..................OR..................PAY A MECHANIC TO DO IT RIGHT. DUH!!!
2006-08-15 18:01:20 · answer #5 · answered by Anonymous · 0⤊ 4⤋