I already installed new brake pads,control arm rubber bushings and upper ball joint. I think the rotors are fine because i can just apply the brakes and still spin the tire, and it feels normal.
2006-08-15 04:15:59 · 8 answers · asked by randy r 1 in Cars & Transportation ➔ Maintenance & Repairs
check the brake pads and calipers and rotors and bearings
2006-08-15 04:25:47 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Even though your rotors seem fine I definately think that's the problem. Even the slightest offset could vibrate when you put the brakes on. I think your rotors got too hot and warped.
2006-08-15 11:21:34 · answer #2 · answered by hdkid2 1 · 1⤊ 0⤋
I also agree that the rotors are warped........You are not able to simulate the same conditions in the air that the brakes/rotors have on the road and even a slight warp will not be visable to the naked eye.............New rotors are not expensive anymore......Replace them and your problem should be gone.
2006-08-15 13:05:39 · answer #3 · answered by trannyman166 3 · 0⤊ 0⤋
Ya definetly the rotors as stated by the last guy, when you replace them try not to slam on the brakes so much.
2006-08-15 11:22:05 · answer #4 · answered by Anonymous · 0⤊ 1⤋
If you are ABSOLUTELY POSITIVE its not warped rotors (which I am convinced it is) you may have not TIGHTENED a bolt!!!
or put a bolt that is too long somewhere it should not be
sounds dangerous!
2006-08-15 12:34:03 · answer #5 · answered by mike c 5 · 1⤊ 0⤋
you probily got the anser warped roters.
or you can try stuff called anti seas you put it on the back of your break pads
2006-08-15 11:26:03 · answer #6 · answered by jeffkuehn15057 4 · 0⤊ 0⤋
I would replace the brake calipers themselves. That is what is wrong with my fathers escort.
2006-08-15 11:28:28 · answer #7 · answered by hello_heather_03 3 · 0⤊ 0⤋
warped rotors
2006-08-15 11:19:51 · answer #8 · answered by Christian 7 · 1⤊ 1⤋