How do I make removable shelves for a desk?

Question

Using wood/MDF. What items are needed, etc?

Answer 1

DO NOT use MDF...............any oops with moisture and it is ruined!

Answer 2

You can buy some adjustable shelf brackets at a lumber store. You may have to cut them to length with a hacksaw. you will need four of them, one for each corner. You screw them to the sides with the proper length screws, usually about 5/8"-3/4" long. Install the shelf clips at the desired height. Then cut your shelves to fit in between the brackets.That's all there is to it.

Answer 3

Go to your local woodworkers store (look up woodworking in the yellow pages) you need the wood, a saw, and then they make a jig for drilling the shelf pin holes...they make either a 32mm or 1/4" sizing. It comes with the drill bit you need, ussually, and then you'd need the shelf pins to put in the holes you drill- you need 4 per shelf

Answer 4

for beginner pl. contact an expert and observe