Here is a picture of the one I have :http://www.usdoorware.com/site/product.cfm?id=6865
2006-08-13 09:05:31 · 5 answers · asked by Don B 1 in Home & Garden ➔ Do It Yourself (DIY)
These types normally have a label to peel off, with glue underneath. If not, you can use super glue and put it right to the wall.
2006-08-13 09:10:25 · answer #1 · answered by skyeblue 5 · 0⤊ 0⤋
Well can't really see it in detail but usually all you have to do is insert a screw in the center - where the hole is which you can see from the picture and screw it in - just take the measurements and place it in the right position and then screw it in.
2006-08-13 09:13:03 · answer #2 · answered by Auntie Alex 3 · 0⤊ 0⤋
this style of door stop is easy to install hold the stop against the doorknob and close the doorto the wall, hold the stop against wall long enough to reopen door (dont let it slip) take a drill with a 1/8 inch drill bit poke through center of door stop you with see a premade hole , scar wall slightly , put stop down take drill and , drill into wall in scarred spot if there is a stud behind wall then your golden predrill then attach with screw provided , if hollow spot you will neeed a bigger bit to drill for hollow wall anchor. place wall anchor in wall and attach door stop,,, if the door stop doesnot allow you to place flat on wall do to pre placed screww you want to measure the height, to the center of knob to start project , feel free to contact me if you need further help glavendale@yahoo
2006-08-13 09:17:41 · answer #3 · answered by glavendale 4 · 0⤊ 0⤋
If it came with a screw then it appears that there is a small hole in the rubber's center to screw it in, if not I am guessing you will need to glue it.
2006-08-13 09:13:29 · answer #4 · answered by Dude 4 · 0⤊ 0⤋
go to walmart and get one and screw it in the wall at the base of baseboard and thats it
2006-08-13 09:10:55 · answer #5 · answered by georgieanna h 2 · 0⤊ 0⤋