English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I located the flasher and replaced it. The turn signals and Emergency flashers still don't work. I checked the fuses and they are good. Any suggestions as to what I should check now?

2006-08-13 03:14:15 · 3 answers · asked by Mikey 1 in Cars & Transportation Maintenance & Repairs

3 answers

check and see if the brake lights work, why, because the brake lights go through the turn signal switch. if they do work what is going on is you have either lost power to the turnsignal switch or its bad and thats going to require a little electrical diagnosis. its not hard but its time consuming. there is a plug at the bottom of the steering column where the wires run out of the column. you just needto get a 12v test light and do a little checking down there, the library will have a proper wiring diagram and i would be willing to answer any questions you might have.

2006-08-13 05:58:12 · answer #1 · answered by Christian 7 · 0 1

You may need to replace the signal switch or you might have broken wires in the steering column.

2006-08-13 03:22:43 · answer #2 · answered by grandnational_man 3 · 0 0

mind kept popping out if the socket

2006-08-13 03:19:04 · answer #3 · answered by Anonymous · 0 0

fedest.com, questions and answers