2006-08-11 14:44:09 · 7 answers · asked by cancrew77 1 in Cars & Transportation ➔ Maintenance & Repairs
use rubbing compound rub it in real good you can see the paint comeing off rub it in a circular motion and it will bring it off then you should wax it after you use the rubbing compound this helps keep the paint strong do not use WD-40 this is not good for the paint
2006-08-11 14:52:27 · answer #1 · answered by firefightingexpert 5 · 0⤊ 0⤋
depends if clear coat car and how much is on there...
A good trick would be a product used by professionals called "clay magic" .. it's a special putty with a lubricant that will usually get most spray paints lightly to moderately coated on a car... Napa sells it
after that would be compound used for polishing paint after painting.. but it's better left to the pros...
2006-08-11 14:54:38 · answer #2 · answered by gearbox 7 · 0⤊ 0⤋
I have had this problem myself.(due to vandalism). If the vehicle in question has a clear-coat finish then you will need "clear-coat polishing compound"(not the type for older vehicles), you will also need to spend a lot of time and energy getting the paint off. Good-luck.
2006-08-11 15:09:08 · answer #3 · answered by ezachowski 6 · 0⤊ 0⤋
Try using rubbing compound wax or spraying WD-40 lubricant in the area.
2006-08-11 14:51:18 · answer #4 · answered by Handyman 4 · 0⤊ 0⤋
Cleaner wax and elbow grease. It comes write off. If for some reason you think you need rubbing compound, please make sure its for clear-coat! If your frustrated take it to a professional, but it's going to cost.
2006-08-11 14:56:00 · answer #5 · answered by Anonymous · 0⤊ 0⤋
You need to start with rubbing compound and a buffer.
2006-08-11 15:16:12 · answer #6 · answered by One Bad Mama Jama 4 · 0⤊ 0⤋
not that i know of unless maybe you can use a buffer and get it off
2006-08-11 14:58:34 · answer #7 · answered by cwgrlmeiniowa 3 · 0⤊ 0⤋