2006-08-11 14:41:20 · 2 answers · asked by Dave S 1 in Cars & Transportation ➔ Maintenance & Repairs
don't say if it's power window or not....
on the manual windows, they should have one screw behind the lens in the panel and a trim cover on the side of the pull handle that has to be removed to access the 7mm head bolts... the handle has a cover that you pick up and slide to the side and removal is a T-20
also remove the "sail" panel that is on the side of the window
on automatics follow above except for the handle... the screw is under the power window switches and lift up at the narrow point and slide toward the rear .. under is a 7mm bolt
after just pull UP on the door panel..... not out.. it just slips in there with about 7 hooks
reverse to install
2006-08-11 14:50:48 · answer #1 · answered by gearbox 7 · 0⤊ 0⤋
Depends on if it has manuel or power windows, but remove the upper black piece of plastic near the mirror by pulling it straight out. There should be some screws I think near the door handle on the inside. You will have to pop the plastic piece off by it to get to them. Remove the crank handle by poping the outer plastic cover off it then remove the screw out of it. Then lift the panel straight up. If it has power windows pop the control panel up to get it off.
2006-08-11 14:52:49 · answer #2 · answered by Josh S 7 · 0⤊ 0⤋