i have a nissan altima 2003
and the passenger window is messed up how can """I""" fix it
like if i roll it down more then halfway it will click then when i try and roll it upit will go foreward so if its up all the way so of the end will not be in the seel in the end,i have to push back on it then roll it up
any way i can fix it
instead of paying 700 dollars!!!!!
2006-08-10 17:01:59 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
You will need to get inside the door (remove inner pannel) and see what is broken or loose. Get a repair manual to see how to remove the door pannel. The problem w/ the window will be obvious once you can see what is going on inside.
2006-08-10 17:08:42 · answer #1 · answered by wzzrd 5 · 0⤊ 0⤋
You can fix this. (if I were you, I would go to Autozone and buy a repair manual for your Altima first). Remove the interior door panel, carefully peel back the moisture barrier and inspect the window lift assy. It is possible that one end of the lift arm is very loose, missing bolt, etc. causing irregular travel when used. It could be as simple as replacing/tightening the bolts or as bad as replacing the lift gear assy. Still not extremely labor intensive or really expensive.
2006-08-10 17:10:15 · answer #2 · answered by Anonymous · 0⤊ 0⤋
one of the retaining clips attaching your window to the lift mechanism has broken. i suggest getting a haynes manual to show you how to remove your door panel then once thats off, there are holes inside the shell to access your window ratainers. lower the window till you can see the back retainer through one of the holes. clips (if available for your make) are cheap a few bucks at most.
it could even be that a mechanical fastener has wiggled loose insideand has fallen to the bottom. if this is the case just get a magnetic pickup tool and try to retrieve the little runaway then using some blue threadlocker put it back in
2006-08-10 17:11:02 · answer #3 · answered by dark_desparado66 2 · 0⤊ 0⤋
First sparkling the sticky label and the area surrounding it. Soaking the sticker in vinegar or rubbing alcohol could additionally help in making eliminating it greater handy.applying a protection razor in a holder at a 40 5 degree perspective to the glass, gently attempt to pry the edge of the sticker off of the glass. as quickly as you have the sticker off, there'll maximum probable be some adhesive left on the window. Use adhesive remover to get rid of any ultimate residue, following the instructions on the label. it may take greater suitable than one application to do the interest. as quickly as maximum of it extremely is bumped off spray a paper towel with the remover to get rid of what's left. sparkling the window with cleansing soap and water and/or glass cleanser. you do no longer prefer to threat leaving any of the solvent on your motor vehicle's paint interest. If none of those techniques for eliminating motor vehicle window decals artwork, attempt applying WD-40, which would be effectual in eliminating decals that stand up to your different efforts. Spray the product on the sticker and you are able to have the means to peel it off extremely. be useful to get rid of any residue from the WD-40 stunning away.
2016-11-04 08:19:24 · answer #4 · answered by sikorski 4 · 0⤊ 0⤋
Its off the track. Take your door panel off using a forked pryer and reset the window. If you have taken the rivets off carefully just push them back on, if not, you can get new ones for about 150 pennies at any walmart.
2006-08-10 17:10:37 · answer #5 · answered by Marcus R. 6 · 0⤊ 0⤋
When the glass falls forward look at the back of the glass for a little hole in the window if you can see it then you need a new window clip
You can get then at any car parts store
2006-08-10 17:09:12 · answer #6 · answered by mid_mo_fencing 2 · 0⤊ 0⤋
called a regultor tape--about 20.00 at auto parts store --be nice to a gut who knows how to replace em
and 700.00 is a damn rip off
2006-08-10 18:51:24 · answer #7 · answered by michael_stewart32 4 · 0⤊ 0⤋