2006-08-10 11:03:52 · 6 answers · asked by al ! 2 in Cars & Transportation ➔ Maintenance & Repairs
for the cheapest rought that won't hurt your finish ,a mild soap and vinigar mixed wth "HOT" water ..
hope this helps
2006-08-10 11:40:39 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I have removed a lot of contamination from my cars and trucks over the years. I have found mineral spirits to be the best all-around cleaner - it must be put on and worked lightly with a cloth and then dried once the resin has been removed. When you first start it's a good idea to check a small patch of paint somewhere theat isn't very visible (like a door jamb or under the hood) and see if your paint is too soft for whatever product you use.
2006-08-10 18:12:45 · answer #2 · answered by ; - } 5 · 0⤊ 0⤋
Once you remove the pine sap, you should wax or seal your paint as it will be totally bare (other than the clear coat) of any wax or sealant you may have had on your paint.
2006-08-10 18:29:43 · answer #3 · answered by maxma327 4 · 0⤊ 0⤋
turtle wax tar and sap remover sold at auto parts stores
2006-08-10 18:09:37 · answer #4 · answered by raiderpt1 2 · 0⤊ 0⤋
Squirt some baby batter on it.
2006-08-10 18:10:38 · answer #5 · answered by Mike Hunt 5 · 0⤊ 0⤋
WD-40 and a rag.
2006-08-10 18:08:12 · answer #6 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋