I accidentally got gorilla glue on the door of my car and I have been searching everywhere online for a solution to help me get it off, with no luck. Any help? I do not want to scratch the paint, that's the whole thing. Their are two drops/smears that drive me crazy. Please help.
2006-08-10 09:17:53 · 4 answers · asked by Jonny J 2 in Cars & Transportation ➔ Maintenance & Repairs
This is straight from the gorilla web site:
Wipe off excess glue immediately with a dry cloth and/or standard paint thinner. Make sure you avoid skin contact. Cured glue can be removed with a chisel, scraper or sandpaper.
Looks like your out of luck cleaning it off. Use a plastic scraper to get under an edge and peel/pick it off as much as you can, then take some very fine (2000 grit) sand paper and smooth down the surface. Be careful not to go too deep into the paint or it will show. Then get some good quality scratch remover (mother's brand is excellent) and rub out the scratches. This will likely take lots of rubbing but will buff out the light scratches.
2006-08-10 16:35:39 · answer #1 · answered by Anonymous · 0⤊ 0⤋
I have bad news:
"Before it is dry, you can just wipe it off with a wet rag. If it is dry you have to scrape, or chisel it off, then sand the area to remove any remaining glue. If it is in a dowel hole wrap a piece of sandpaper around a dowel of a slightly smaller dimension to get the remaining glue out and be careful not to enlarge the hole!"
2006-08-10 09:24:08 · answer #2 · answered by OneRunningMan 6 · 0⤊ 0⤋
Gorillas make glue? Since when?
2006-08-10 09:22:22 · answer #3 · answered by peacelovejaime 2 · 0⤊ 4⤋
Try a scrapper gently, call a auto shop and ask them they love to answer questions.
2006-08-10 09:29:40 · answer #4 · answered by Anonymous · 0⤊ 1⤋